Table of Contents
Advertisement
15. Feed Motor M2
16. Tension Motor M3
17. Strap Accumulator M4
18. Automatic Feed Motor M5
19. Proximity Sensor SQ1
20. Proximity Sensor SQ2
21. Proximity Sensor SQ3
22. Fan (M11)
23. Heater
24. Photo Eye (Option)
3.4 Installation
1. Remove the packing material and check that the machine is complete and
without any shipping damage.
2. Adjust the table height by repositioning the screws underneath the machine
frame (refer to below drawing). After adjustments, be sure to tighten all the
fixing screws.
Caution!
Be sure to take out the wire for the proximity switch underneath the left side of
machine to avoid any damage before adjusting the table height.
-A13-
Hide quick links:
Advertisement
Table of Contents
