Table of Contents
Advertisement
7. Maintenance
Warning:
Before any maintenance or repairs on the machine, set the Main Power
Switch to "O" (OFF). Wait about 5 minutes for cooling down the heater to
avoid burns with this area.
1. Cleaning and Lubrication
The high reliability and long service life of the strapping machine will depend on regular
cleaning and maintenance.
ATTENTION!
All the important strap transport components, such as the drive rollers and the strap
guides, must be kept free from oil and grease. (lubricant)
The lubricant has to be non-resinous.
The lubricant is SAE 30
2. Maintenance
Only use original spare parts supplied by manufacturer.
Daily:
Use air gun to clean the circled positions (nearby the cutters, strap guide and accumulating
feeding rollers) daily
Remove plastic residue in the machine.
Air
-A32-
Air
Air
Hide quick links:
Advertisement
Table of Contents
