Page 2
2019/11/6 AFi-ALN Quick Start Guide Touchscreen Display AFi-ALN Quick Start Guide The front of the AmpliFi Router features a touchscreen display. Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use.
2019/11/6 AFi-ALN Quick Start Guide The Signal LEDs will reflect signal strength once the MeshPoint is connected AFi-ALN Quick Start Guide to the Router. Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use.
2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Installing the MeshPoint App Features The system dashboard is displayed in the System window. It provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds.
2019/11/6 AFi-ALN Quick Start Guide your wireless network named with the -guest label. No password is AFi-ALN Quick Start Guide required. As guests connect, the number of users connected will be displayed in the app. Tap Stop at any time to turn off the guest network.
2019/11/6 AFi-ALN Quick Start Guide AFi-ALN Quick Start Guide Router Reset Use an object such as a straightened paper clip to press Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off.
2019/11/6 AFi-ALN Quick Start Guide Limited Warranty AFi-ALN Quick Start Guide ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2019/11/6 AFi-ALN Quick Start Guide CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.