Displaying Logical Partition Processing Configuration - IBM AS/400e Manual

You can perform this procedure from system service tools (SST) or dedicated service tools (DST).
To find the Display Partition Status display, follow these steps:
1. Start SST or DST.
2. From SST select option 5 (Work with system partitions); from DST select option 11 (Work with system
partitions) and press Enter.
3. Select option 1 (Display partition information) and press Enter.
4. Select option 1 (Display partition status) and press Enter.
Once you arrive at the Display Partition Status display, you can use the function keys that are listed below
to display the following information:
v F1– This key will bring you to the Help display. Go here for a detailed explanation of the fields on this
display.
v F9– This key toggles between Exclude reference code detail and Include reference code detail. This
option allows you to choose whether or not you can see the details of secondary partition reference
codes.
v F10– This key brings up the Monitor Partition Status display. This display refreshes automatically as the
system updates system reference codes for secondary partitions.
v F11– This key brings up the Display Partition Processing Configuration display.

Displaying logical partition processing configuration

You can find out how much main storage, how many processors, and how much interactive performance
assigned to each logical partition with the Display Partition Processing Configuration display. If you start
this display from the primary partition, you get information about the primary partition and all the secondary
partitions. If you start this display from a secondary partition, you get information only for that secondary
partition.
| You can print the information in this display by pressing F6.
You can use the Display Partition Processing Configuration display from system service tools (SST) or
dedicated service tools (DST). To start the Display Partition Configuration display follow these steps:
1. Start SST or DST.
2. From SST select option 5 (Work with system partitions); from DST select option 11 (Work with system
partitions) and press Enter.
3. Select option 1 (Display partition information).
4. Select option 2 (Display partition processing configuration).
Displaying more processing information
Once you arrive at the Display Partition Processing Configuration display, you can use the F10 function
key to display the following information:
Total Processors
This field shows you:
v The current and pending (updated after the next initial program load) number of processors.
v The minimum and maximum number of processors allowed for each logical partition.
Main Storage Size (MB)
This field shows you the current and pending amount of memory for each logical partition. It also
shows you the minimum and maximum amount of memory available for each logical partition. Only
current information shows if SST or DST is running in a secondary partition. To find this field,
8
AS/400e: Logical Partitions: Managing