Printing System Configuration For Logical Partitions - IBM AS/400e Manual

At the Number of reference codes to display field, you can choose to display any number of reference
codes between one and 200. For example, if the display reports 200 reference codes, you could choose to
view the last 50 or 150 reference codes.

Printing system configuration for logical partitions

You can perform this procedure from system service tools (SST) or dedicated service tools (DST) on the
primary partition. If you print from SST, the system will print the data to a spooled file. When you finish, go
to an OS/400 command line and print the spooled files. If you print from DST, you will get the Work with
Printers display if you have not selected a DST printer. If this happens, select a printer, then continue with
the procedure.
Follow these steps to print the system configuration:
1. From the primary partition start SST or DST.
2. From SST select option 5 (Work with system partitions); from DST select option 11 (Work with system
partitions) and press Enter.
3. Select option 1 (Display partition information).
|
4. For a complete list of all the I/O resources, go to the Display System I/O Resources display. For a list
of allocated I/O resources, go to the Display Allocated I/O Resources display.
5. At the Level of detail to display field, type *ALL to set the level of detail to ALL.
6. Press F6 to print the system I/O configuration.
7. Select option 1 (132 characters wide) and press Enter to print to a spooled file.
| 8. Press F12 to return to the Display Partition Information display.
9. Select option 2 (Display partition processing configuration).
10. Press F6 to print the processing configuration.
|
11. Select option 1 (132 characters wide) and press Enter to print to a spooled file.
12. Return to an OS/400 command line and print these two spooled files.
Chapter 2. Displaying and printing logical partition information
13