Transport; Storage; Functional Description; Putting Into Operation - Abicor Binzel MIG/MAG ROBO Series Operating Instructions Manual

MIG/MAG ROBO welding torch

4.1 Transport

Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging
Tab. 10
Transport

4.2 Storage

5 Functional description

6 Putting into operation

Although the items delivered are carefully checked and packaged, it is not
possible to exclude the risk of transport damage.
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
material. If you have any questions about the packaging and/or how to
secure an item during shipment, please consult your supplier.
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for shipment and storage on page EN-8
The fully functional MIG/MAG ROBO welding torch system is made up
of the ROBO welding torch and the cable assembly. Together, the components
form a fully-functional unit that provides an arc for welding when supplied with
the appropriate consumables. The welding wire required for welding is fed
through the ROBO welding torch system all the way to the contact tip. The
contact tip transmits the welding current to the welding wire, producing an arc
between the welding wire and the workpiece. The arc and the molten pool are
protected by the inert gas (MIG) and the active gas (MAG).
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close the compressed air supply.
• Disconnect the mains plug.
5 Functional description
EN - 11