Chapter 3: Operation And Cleaning; Projected Capacitive Touchscreen; Using The Pcap Touchscreen; Touchscreen Cleaning Procedures - NCR XL7W User Manual

Operation and Cleaning
Chapter 3:

Projected Capacitive Touchscreen

PCap touchscreens have all the benefits of normal capacitive touchscreens and more.
• Fast processing of tough information
• High sensitivity (use conductive pencils, with hands, and with thin gloves)
• 2-point multi-touch capability
• High resolution
• Improved legibility and display brightness due to optimal light transmission
In addition, the technology of PCap touchscreens is characterized by significantly
higher robustness and stability than common capacitive touchscreens because the active
touch surface is located on the back side of the touchscreen. instead of the front side.
Therefore, the active surface is not directly touched and does not wear off by normal
use.
Since most surface contamination do not cause interference to the touchscreen the NCR
XL7W (5907) can be used in public or severe environmental conditions.

Using the PCap Touchscreen

The PCap touchscreen responds to the lightest touches. Touching with a single finger
resembles the left mouse button. Two fingers are used to zoom IN (fingers brought
together) or zoom OUT (fingers pulled apart). Circular motion can be used to rotate an
element on the screen. This function must be supported by either the Operating System
or the application.

Touchscreen Cleaning Procedures

1. Using a soft cloth dampened with isopropyl alcohol or a mild non-abrasive soap &
2. Wipe the screen and edges dry.
3. Make sure the glass and screen edges dry completely before using the unit.
4. Do not use sharp objects to clean around the edges of the touchscreen.
water solution, gently wipe the touchscreen clean.