HP ProCurve 6400cl Series Access Security Manual page 128
Hide thumbs
Also See for ProCurve 6400cl Series:
- Management and configuration manual (508 pages) ,
- Installation and getting started manual (84 pages) ,
- Management manual (664 pages)
Table of Contents
Advertisement
TACACS+ Authentication
Configuring TACACS+ on the Switch
Console Login (Operator or Read-Only) Access: Primary using TACACS+ server.
Secondary using Local.
ProCurve (config)# aaa authentication console login tacacs local
Console Enable (Manager or Read/Write) Access: Primary using TACACS+ server.
Secondary using Local.
ProCurve (config)# aaa authentication console enable tacacs local
Telnet Login (Operator or Read-Only) Access: Primary using TACACS+ server.
Secondary using Local.
ProCurve (config)# aaa authentication Telnet login tacacs local
Telnet Enable (Manager or Read/Write Access: Primary using TACACS+ server.
Secondary using Local.
ProCurve (config)# aaa authentication telnet enable tacacs local
Deny Access and Close the Session After Failure of Two Consecutive Username/Password Pairs:
ProCurve (config)# aaa authentication num-attempts 2
5-14
For example, here is a set of access options and the corresponding commands
to configure them:
Advertisement
Table of Contents
