Safety Instructions - ZANKER KBA23022SK User Manual

WARNING: Keep ventilation openings, in the appliance enclosure or in the
•
built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate
•
the defrosting process, other than those recommended by the
manufacturer.
WARNING: Do not damage the refrigerant circuit.
•
WARNING: Do not use electrical appliances inside the food storage
•
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
Do not use water spray and steam to clean the appliance.
•
Clean the appliance with a moist soft cloth. Only use neutral detergents.
•
Do not use abrasive products, abrasive cleaning pads, solvents or metal
objects.
Do not store explosive substances such as aerosol cans with a flammable
•
propellant in this appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its
•
Authorised Service Centre or similarly qualified persons in order to avoid a
hazard.

Safety instructions

Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the
built-in structure due to safety manner.
• Follow the installation instructions supplied with the
appliance.
• Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
• Make sure the air can circulate around the
appliance.
• At first installation or after reversing the door wait at
least 4 hours before connecting the appliance to the
power supply. This is to allow the oil to flow back in
the compressor.
• Before carrying out any operations on the appliance
(e.g. reversing the door), remove the plug from the
power socket.
• Do not install the appliance close to radiators or
cookers, ovens or hobs.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct
sunlight.
• Do not install this appliance in areas that are too
humid or too cold.
• When you move the appliance, lift it by the front
edge to avoid scratching the floor.
Electrical connection
Warning! Risk of fire and electric shock.
Warning! When positioning the
appliance, ensure the supply cord is not
trapped or damaged.
Warning! Do not use multi-plug adapters
and extension cables.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate
are compatible with the electrical ratings of the
mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical
components (e.g. mains plug, mains cable,
compressor). Contact the Authorised Service Centre
13