Table of Contents
Advertisement
Preliminary operations
2.
DESCRIPTION OF THE
AUTOMATION SYSTEM
2.0
COMPONENTS LAYOUT (B2)
A - Aprimatic fl ashing warning/courtesy lamp (to be positioned at a
point clearly visible from both approaches)
B - Aprimatic safety photocell
C - Manual key-operated control unit (magnetic, digital, keyboard
combination lock, mechanical, etc.)
D - Aprimatic microprocessor control unit in watertight container (if
possible, to be fi tted in a position sheltered from atmospheric
agents)
2.1
SYSTEM ELECTRICAL CONNECTION
- When making the electrical connections,carefully follow the instructions for each of the components, referring to the wiring diagram D1.
!
Warning
• Make the electrical connection of the single components after having completed their installation.
• The entire circuit must be made consistent with the current safety regulations.
• Use cables with a cross-section of 1.5 mm
• Protect the operator power cable with a sheath if necessary; do this before connecting the cable to the junction boxes.
!
Warning
• Every operator comes complete with a pickup capacitor. During installation, connect the capacitor to the electrical equipment
according to the wiring diagram supplied.
- After making the electrical connections, check the thrust force at the end of the gate leaf; if necessary, adjust the pressure of the operator
according to the procedure described in the specifi c paragraph.
D1
1
2
3
9
F - Water tight operator electricity supply junction box
G - Antenna
H - Aprimatic ZT series operators
I
L - Open position gate stop
M - Close position gate stop
N - Ground connection for metal framework
Consult the price-list for additional (optional) safety devices.
2
for the wiring.
5
6
9
4
7
8
6A
0,030 A
- 16 -
(recommended), to be positioned so that cables are not subject
to dangerous stretching during the gate motion
- Electric lock (optional)
Information
1 Antenna
2 Flashing lamp
3 Receiver photocell
4 Transmitter photocell
5 Internal control panel
6 Key control
7 Electrical lock
8 Electronic control unit
9 Junction box
Hide quick links:
Advertisement
Table of Contents
