Table of Contents
Advertisement
94000-gb.fm5 Page 15 Thursday, September 13, 2001 4:13 PM
HOW TO FILL THE RINSE AID DISPENSER
The rinse aid facilitates drying and prevents the
formation of unsightly spots and streaks on
crockery. Before using the dishwasher for the
first time, fill the rinse aid dispenser. Thereafter,
regularly check the rinse aid level.
Only use rinse aids recommended for use in
domestic dishwashers.
1. Unscrew the cap and press button A (see
drawing). Fill the dispenser with rinse aid up
to the dashed line (about 100 ml maximum).
2. Immediately wipe away any spilt rinse aid
to prevent excess suds which may spoil
washing results.
3. Replace the cap.
How to adjust the rinse aid dosage
regulator.
(Open the cover and close again following
adjustment).
Factory setting: 3.
If you are not satisfied with washing or drying
results, change the dial setting with a spoon
handle or coin.
If crockery is prone to whitish streaks, reduce the
dosage by turning the dial to a lower setting. If
instead crockery is wet, increase the dosage by
turning the dial to a higher setting.
Rinse aid level indicator (visual or
electric indicator depending on the
model installed).
Electric indicator:
The indicator lamp
illuminates when the rinse aid dispenser is
empty.
Visual indicator:
light = empty
dark = full.
on the control panel
A
15
Hide quick links:
Advertisement
Table of Contents
