Table of Contents
Advertisement
2.1
Inserting or changing the SIM card
The device must be switched off when you insert or change the SIM card.
A plug-in SIM card (3 V) is used.
1. Make sure that the device is disconnected from the supply voltage.
2. The TAINY GMOD-T1 must be
opened to insert the SIM card.
The housing is fastened by two
clamps, one on top of the housing and
one on the bottom side.
3. With a suitable object press one of the
clamps cautiously (see picture) so that
the catch opens.
4. Remove the rear section of the
housing.
TAINY GMOD-T1
Putting the device into operation
Clamp
Clamp
Seite 7 von 31
Advertisement
Table of Contents
