Setting The Pin And Apn; Enter Pin; Set Apn - Sagem Dr. Neuhaus Tainy GMOD-T1 Installation Manual

Operation
3.1

Setting the PIN and APN

Enter PIN

Set APN

The PIN and the APN are not stored in the TAINY GMOD-T1. They must be entered
every time the GSM module or the complete device is switched on.
Page 24 of 31
The PIN is set with the following command:
AT+CPIN="xxxx"
Please also refer to chapter Working with a terminal program, on
page 26.
This is, for example, the standard APN of your GSM network
operator for access from the GPRS network to the Internet (for T-
Mobile in Germany it is: internet.td1.de ). Or it is the APN for
access to your corporate network, which must be connected
directly to the GPRS network.
The APN is set with the command:
AT+CGDCONT=1,"IP","<APN>","0.0.0.0",0,0
Please also refer to chapter Working with a terminal program, on
page 26.
TAINY GMOD-T1