Table of Contents
Advertisement
Putting the device into operation
2.3
Switching the device on/off
Make sure that the TAINY GMOD-T1 is connected correctly (see chapters Connecting
the device and Technical Data).
Switching on...
Switching off the
GSM engine
(Recommended)
Switching off...
Page 12 of 31
The devices switches on as soon as the operating voltage is
supplied and the switch input (SW) is active.
Switch off the GSM module with the AT command AT+CPOF
before disconnecting the device from the supply voltage. This is the
only way to ensure that it logs off correctly from the GSM network.
The device switches off when disconnected from the supply
voltage.
TAINY GMOD-T1
Advertisement
Table of Contents
