Putting The Device Into Operation; Connections And Leds - Sagem Dr. Neuhaus Tainy GMOD-T1 Installation Manual

Putting the device into operation

2 Putting the device into operation
To put the device into operation, perform the following steps in the order given:
1. Inserting or changing the SIM card
2.
Connecting the device
3.
Installing the modem driver under Windows
4. Setting up the dial-up connection (under Windows)
Connections and
LEDs
LED Status
P (Power) On permanently
Off
C (Connect)
On permanently
Off
S (Status) Blinking regularly
Flickering
Off
Page 6 of 31
0V
SW
+24V
+24V
Connectors for supply voltage
24 V DC voltage
Antenna
LEDs:
COM (RS232)
for connecting the application
Meaning
Operating voltage on
No operating voltage
GSM connection active (DCD on)
No GSM connection
Device booked into GSM network
Data exchange at COM port
Device not booked into GSM network
Page
P (Power)
C (Connect)
S (Status)
TAINY GMOD-T1
7
11
13
17