Sagem F@st 1000 N56815740110 User Manual
  1. Manuals
  2. Brands
  3. Sagem Manuals
  4. Modem
  5. F@st 1000 N56815740110
  6. User manual
Sagem F@st 1000 N56815740110 User Manual

Sagem F@st 1000 N56815740110 User Manual

Equipped of an usb interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TM
SAGEM F@st
1000
User Guide
N56815740110
March 2002 Issue
S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F@st 1000 N56815740110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sagem F@st 1000 N56815740110

Summary of Contents for Sagem F@st 1000 N56815740110

  • Page 1 SAGEM F@st 1000 User Guide N56815740110 March 2002 Issue...
  • Page 2 Registered trademarks The following trademarks are referred to in the guide: - SAGEM F@st™ is a registered trademark of SAGEM SA. - Windows is a registered trademark of Microsoft Corporation.

  • Page 3: Table Of Contents

    CE declaration of conformity Bearer and transmission mode 1.6.1 ADSL 1.6.2 ATM 1.6.3 To which ADSL lines can the SAGEM F@st™ 1000 be connected? 1.6.4 How should the SAGEM F@st™ 1000 be used with analog terminals? Description Composition of the supply...
  • Page 4 4.3.1 "PWR" LED off 4.3.2 PWR indicator blinking continuously 4.3.3 "LINE" LED blinking 4.3.4 "USB" LED off 4.3.5 "DATA" LED off 4.3.6 All LEDs lit User Guide - N56815740110 Page 0-2 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 5 5.2.1 RJ11 / RJ11 LINE cable 5.2.2 Type A / Type B USB cable Technical specifications 5.3.1 Equipment specifications 5.3.2 Software specifications List of abbreviations 5-10 User Guide - N56815740110 Page 0-3 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 6 User Guide - N56815740110 Page 0-4 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 7: Sagem F@St™ 1000 Modem Overview

    1. SAGEM F@st™ 1000 modem overview User Guide - N56815740110 Page 1-1 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 8: Overview

    • Any attempt to open the mains adapter block is strictly prohibited and may expose you to the risk of fatal electric shocks. • Any attempt to open the SAGEM F@st™ 1000 unit is strictly prohibited and may expose you to the risks of fatal electric shocks.

  • Page 9: Installation Instructions

    ! Room temperature must not exceed 45°C. ! The SAGEM F@st™ 1000 can be placed on a desktop or mounted vertically on a wall. ! The SAGEM F@st™ 1000 must not be exposed to strong sunlight or strong sources of heat.

  • Page 10: Warnings From Regulatory Organizations

    ADSL line port TNV3 CE declaration of conformity Hazardous Voltage, Primary Circuit Safety Extra Low Voltage Circuit Telecommunication Network Voltage Level 3 Circuit User Guide - N56815740110 Page 1-4 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 13: Bearer And Transmission Mode

    In addition, the telephone service does not depend on the state of the SAGEM F@st™ 1000: whether powered up or powered down, whether the data connection is established or not, the telephone service will always be available.

  • Page 14: To Which Adsl Lines Can The Sagem F@St™ 1000 Be Connected

    1 - SAGEM F@st™ 1000 modem overview 1.6.3 To which ADSL lines can the SAGEM F@st™ 1000 be connected? The SAGEM F@st™ 1000 is compliant with the following DMT (Discrete Multi Tone) technology ADSL standards: ! ANSI T1.413 Rev 2, ! G.992.1 (G.dmt), ! G.992.2 (G.lite),...

  • Page 15: Description

    • Power supply interface. • USB interface. • Wide area network interface (ADSL). The interface ports are all implemented on the rear of the unit. User Guide - N56815740110 Page 1-9 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 16 Note: How to interpret these four LEDs is described in section 2.3 (Operation) and section 4 (Troubleshooting the SAGEM F@st 1000 modem). User Guide - N56815740110 Page 1-10 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 17: Composition Of The Supply

    ! A sheet with warning notes concerning installation and use. ! A CD ROM with: • a copy of the application software in French and in English for the SAGEM F@st™ 1000, • SAGEM F@st™ 1000 user guide in French and in English, in pdf format files, •...

  • Page 18: Prerequisites

    1 - SAGEM F@st™ 1000 modem overview Prerequisites To use the SAGEM F@st™ 1000, you must have the following: Telephone line side: ! Telephone line supporting ADSL transmission. ! Splitters compliant with ADSL standards (use with an analog telephone or fax terminal).

  • Page 19: Connecting The Sagem F@St™ 1000

    2. Connecting the SAGEM F@st™ 1000 User Guide - N56815740110 Page 2-1 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 20: Physical Installation

    2 - Connecting the SAGEM F@st™ 1000 Physical installation Desktop ! Place the SAGEM F@st™ 1100 unit on the base's non-slip feet. ! Check that the various cables are run correctly to avoid any risk that the cables might be tugged or the unit might topple.

  • Page 21: Sagem F@St™ 1100 Port Connections

    2 - Connecting the SAGEM F@st™ 1000 SAGEM F@st™ 1100 port connections Three connections are required to use the SAGEM F@st™ 1100 : ! Connection to the mains supply. ! Connection to a computer by USB interface. ! Connection to the wide area network (ADSL compatible telephone line).

  • Page 22: Connection To A Computer By Usb Interface

    USB (Type B) USB (Type A) Straight through Cable The SAGEM F@st™ 1000 can also be connected to the computer via a USB hub. User Guide - N56815740110 Page 2-4 eproduction or communication without the written consent of SAGEM SA...

  • Page 23: Connecting Analog Terminals

    2 - Connecting the SAGEM F@st™ 1000 2.2.3 Connecting analog terminals To connect the SAGEM F@st™ 1000 and analog terminals to the same telephone line, you must use splitters. There are two types of configuration that use splitters with different structures.

  • Page 24: Connection To The Wide Area Network (Adsl Line)

    2.2.4 Connection to the wide area network (ADSL line) Caution: Use only the "ADSL" line cable supplied with the SAGEM F@st™ 1000 for the link to the wide area network. This 3 m cable is terminated at both ends by an RJ11 connector (for details, refer to the appendices).

  • Page 25: Installation Procedure

    • to your computer via USB interface. ! Check that the connections have been correctly made, as indicated by the four LEDs on the SAGEM F@st™ 1000. The required LED states will depend on whether the USB or Ethernet mode is used:...
  • Page 26 User Guide - N56815740110 Page 2-8 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 27 3. Installing the SAGEM F@st 1000 modem User Guide - N56815740110 Page 3-1 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 28 If you want to upgrade your version of Windows, you should uninstall your SAGEM modem before beginning the upgrade of Windows. You can install it again as soon as the upgrade is completed. User Guide - N56815740110 Page 3-2 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 29: Installing The Sagem F@St Tm 1000 Modem

    3 - Installing the SAGEM F@st 1000 modem Installing for Windows XP For Windows XP professional, the installation of the SAGEM F@st 1000 modem is carried out according to the following process : ! Installing the modem drivers, - ADSLBOOT driver: This driver is required when the modem starts-up (boot loader), - VVBusUSB driver: It manages data exchanges on the USB bus, - VVBATM driver: It manages the ATM link layer.
  • Page 30 The install program automatically and fully configured the PC to enable immediate connection to Internet; for this it created the Internet ADSL icon on the Windows desktop. User Guide - N56815740110 Page 3-4 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 31: Connecting / Disconnecting

    ! Check the "Save this user name and password for the following users:" box as you like. ! Click on "Dial" to make the connection and access Internet. User Guide - N56815740110 Page 3-5 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 32 Remark: You can also make the connection to Internet from the "Start" menu of Windows, as shown below (Start / Connect To / Internet ADSL): User Guide - N56815740110 Page 3-6 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 33 To disconnect or unplug a peripheral safely without stopping the PC, Windows XP recommends using the following procedure: ! Left-click once on the following icon, in the Windows Taskbar, at the bottom right of your desktop. User Guide - N56815740110 Page 3-7 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 34: Creating And Configuring The Adsl Access Icon

    1000 modem A list of the active devices appears: ! Then click on Safely remove SAGEM USB VvBus for Helium. The SAGEM VVB ATM port pilot will be stopped at the same time. After a few seconds, Windows displays a confirmation message saying that the pilots are deactivated.
  • Page 35 ! Click on Network Connections ; the following screen appears: ! Right-click on the mouse on the ATM Connection icon and select Properties ; the following screen appears: User Guide - N56815740110 Page 3-9 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 36 ! Select in the General panel the ATM Call Manager component. ! Click on Properties ; the following screen appears: ! Click on Add ; the following screen appears: User Guide - N56815740110 Page 3-10 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 37 This information can be obtained from your Internet Access Provider (IAP). This information can be obtained from your Internet Access Provider (IAP). User Guide - N56815740110 Page 3-11 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 38 ?, then click on OK to confirm your choice. If the Phone and modem Options screen appears, click on Cancel. User Guide - N56815740110 Page 3-12 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 39 1000 modem ! Select Dial-up connection then click on Next ; the following screen appears: ! Check only the appropriate box to select the SAGEM VVB ATM port vXYZ (ATMx-0) device then click on Next ; the following screen appears :...
  • Page 40 Match only to applications calling this address when setting the PVC. (see 3.2.3.1/Configuring the ATM settings). User Guide - N56815740110 Page 3-14 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 41 The shortcut below lets you connect to the Internet directly from the Windows home page. To make an Internet connection, refer to paragraph 3.2.2. User Guide - N56815740110 Page 3-15 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 42: Uninstalling The Modem

    3.2.4 Uninstalling the modem To uninstall the modem: ! In the Windows XP Start menu, select All Programs then SAGEM F@st 1000 and at last F@st 1000 uninstallation. The following screen appears: ! Click on OK then disconnect the modem following the instructions below: ! Click on OK to finish the uninstallation of the modem.

  • Page 43: Installing For Windows 2000 Professional

    3 - Installing the SAGEM F@st 1000 modem Installing for Windows 2000 professional For Windows 2000 professional, the installation of the SAGEM F@st 1000 modem is carried out according to the following process : ! Installing the modem drivers, ! Configuring the ATM settings.
  • Page 44 The install program automatically and fully configured the PC to enable immediate connection to Internet; for this it created the ADSL connection icon on the Windows desktop. User Guide - N56815740110 Page 3-18 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 45: Connecting / Disconnecting

    The following screen appears: ! Type in your User name and Password. ! Click Dial to make the connection and access Internet. User Guide - N56815740110 Page 3-19 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 46 ! Left-click once on the following icon, in the Windows Taskbar, at the bottom right of your desktop. A list of the active devices appears: ! Then left-click on Stop SAGEM USB VvBus for Helium. The SAGEM VVB ATM port pilot will be stopped at the same time.

  • Page 47: Creating And Configuring The Adsl Access Icon

    3.3.3 Creating and configuring the ADSL access icon The install program of the SAGEM modem automatically configured an ATM Permanent Virtual Circuit (PVC) for you; if you want to change the settings of the connection, the following procedures are given for your information: •...
  • Page 48 ! 3 - Installing the SAGEM F@st 1000 modem ! Select ATM call manager and click on Properties. ! Click Add. The following window appears: User Guide - N56815740110 Page 3-22 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 49 This information can be obtained from your Internet Access Provider (IAP). This information can be obtained from your Internet Access Provider (IAP). User Guide - N56815740110 Page 3-23 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 50 ! To configure your connection, click Next. The following screen appears: ! Select Dial-up to private network, then click Next to show the following screen: User Guide - N56815740110 Page 3-24 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 51 3 - Installing the SAGEM F@st 1000 modem ! Make sure that the SAGEM WB ATM port vX.Y.ZZ (ATMx-0) device is selected, then click Next. ! To use the PVC created automatically by the modem install program, type 123 in the Phone number edit field.
  • Page 52 ! Click Finish for Windows to create a new icon with the name of the connection previously entered. Windows then asks you to make an Internet connection. Refer to paragraph 3.3.2. User Guide - N56815740110 Page 3-26 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 53: Uninstalling The Modem

    3.3.4 Uninstalling the modem To uninstall the modem: ! In the Windows 2000 Start menu, select Programs then SAGEM F@st 1000 and at last "Uninstall F@st 1000". The following screen appears: ! Click on OK then disconnect the modem following the instructions below: ! Click on OK to finish the uninstallation of the modem.

  • Page 54: Installing For Windows Millennium

    ! Connect the power supply cable to the modem (connector marked PWR), then connect the mains adapter to power up the SAGEM F@st 1000. After connecting the modem, the PC installs the drivers ADSLBOOT, VVBusUSB and VVBATM. User Guide - N56815740110 Page 3-28 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 55 Networking group, as well as a shortcut to this icon on the Windows ME desktop (see 3.4.2). Installation of the modem is now finished. User Guide - N56815740110 Page 3-29 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 56: Connecting To / Disconnecting From Internet

    - a shortcut on the ADSL Internet icon in the Windows ME desktop. - the SAGEM F@st 1000 group in the Windows ME Start/Programs menu, or for experts, an Internet connection icon in the Dial-Up Networking group; to find it: ! double-click on the Windows ME My computer icon, then Control panel, and then Dial-Up Networking.
  • Page 57 ! double-click on the ADSL Internet shortcut located on the Windows desktop, ! or double-click on the ADSL Internet icon of the Dial-Up Networking group. ! or click on SAGEM F@st 1000 then Internet Connection in the Start/Programs menu. The following screen appears:...

  • Page 58: Configuring A New Dial-Up Connection

    ! Enter the name of the connection (e.g. My connection). ! Select the device PPP ATM Adapter. ! Click on Configure below the PPP ATM Adapter device. The following screen appears: User Guide - N56815740110 Page 3-32 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 59 ! Choose the options: In Advanced options: disable software compression. In Allowed network protocols: disable the protocols NetBEUI and IPX/SPX, enable the protocol TCP/IP. User Guide - N56815740110 Page 3-33 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 60 IP header compression, enable Use default gateway on remote network. ! Then click OK twice until the new connection properties closes. User Guide - N56815740110 Page 3-34 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 61: Uninstalling The Modem

    ! Switch off the modem by unplugging the power supply cable either on modem side (connector marked PWR), or on the mains side. ! In the Windows ME Start menu, select Programs then SAGEM F@st 1000 and finally Uninstall F@st 1000.

  • Page 62: Installing For Windows 98 First Edition

    ! 3 - Installing the SAGEM F@st 1000 modem Installing for Windows 98 First Edition For Windows 98 First Edition, installation of the SAGEM F@st 1000 modem is carried out according to the following process: ! Installing the modem drivers, ! Configuring a new dial-up connection.
  • Page 63 The PC is set as DHCP client and the modem as DHCP server. By default the modem attributes to the PC the address 10.0.0.139. User Guide - N56815740110 Page 3-37 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 64 ! Click Yes to finish the installation. If the modem configuration is modified, the modem must be restarted for the modified parameters to be taken into account. User Guide - N56815740110 Page 3-38 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 65: Connecting To / Disconnecting From Internet

    - a shortcut in the Windows 98FE desktop, to establish directly a connection to Internet. - the SAGEM F@st 1000 group in the Windows 98FE Start/Programs menu, or for experts, an Internet connection icon in the Dial-Up Networking group; to find it: ! double-click on the WINDOWS 98FE My computer icon, then on Dial-Up Networking.
  • Page 66 ! double-click on the ADSL Internet shortcut located on the Windows desktop, ! or double-click on the ADSL Internet icon of the Dial-Up Networking group. ! or click SAGEM F@st 1000 then Internet Connection in the Start/Programs menu. NOTE: when you first connect, Windows asks you to specify the general dialing parameters (country, regional code, external line prefix).

  • Page 67: Configuring A New Dial-Up Connection

    If you want to configure other connections or change certain ATM settings: ! Click on Make New Connection. ! Enter the name of the connection (e.g. My connection). User Guide - N56815740110 Page 3-41 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 68 ! Click Next, then Finish. On the icon for the newly created connection: ! Right-click and choose Properties. ! Select the tab Server Type: User Guide - N56815740110 Page 3-42 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 69 IP header compression, − enable Use default gateway on remote network. Then click OK twice until the new connection properties closes. User Guide - N56815740110 Page 3-43 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 70: Uninstalling The Modem

    ! Switch off the modem by unplugging the power supply cable either on modem side (connector marked PWR), or on the mains side. ! In the Windows 98FE Start menu, select Programs then SAGEM F@st 1000 and finally Uninstall F@st 1000.

  • Page 71: Installing For Windows 98 Second Edition

    3 - Installing the SAGEM F@st 1000 modem Installing for Windows 98 Second Edition For Windows 98 Second Edition, installation of the SAGEM F@st 1000 modem is carried out according to the following process: ! Installing the modem drivers, ! Configuring a new dial-up connection.
  • Page 72 Networking group, as well as a shortcut on this icon on the Windows 98FE desktop and a command line in the Start/Programs menu (see 3.6.2). Installation of the modem is now finished. User Guide - N56815740110 Page 3-46 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 73: Connecting To / Disconnecting From Internet

    - a shortcut in the Windows 98FE desktop, to establish directly a connection to Internet. - the SAGEM F@st 1000 group in the Windows 98SE Start/Programs menu, or for experts, an Internet connection icon in the Dial-Up Networking group; to find it: ! double-click on the Windows 98SE My computer icon, then on Dial-Up Networking.
  • Page 74 ! double-click on the ADSL Internet shortcut located on the Windows desktop, ! or double-click on the ADSL Internet icon of the Dial-Up Networking group. ! or click SAGEM F@st 1000 then Internet Connection in the Start/Programs menu. The following screen appears:...

  • Page 75: Configuring A New Dial-Up Connection

    ! Switch off the modem by unplugging the power supply cable either on modem side (connector marked PWR), or on the mains side. ! In the Windows 98SE Start menu, select Programs then SAGEM F@st 1000 and finally Uninstall F@st 1000.

  • Page 76: Reading The Software Version Of The Product

    Device Manager button. ! Drop down the list of the installed network adapters by clicking twice on Network adapters. The SAGEM modem is shown in this list, with the software version: SAGEM VVB ATM port [version X.Y.Z]. User Guide - N56815740110...

  • Page 77: For Win 2000

    ! Select the Hardware tab, then click on Device manager…. Windows displays a list of installed components. ! Drop down the list of the installed network adapters by clicking twice on Network adapter. The SAGEM modem is shown in this list, with the software version: SAGEM VVB ATM port [version X.Y.Z]. User Guide - N56815740110...

  • Page 78: For Win Me

    ! Right-click on the Network favorites icon. ! Select Properties, Windows then displays a list of the network components installed. The SAGEM modem is shown in this list, with the software version: SAGEM VVB ATM port [version X.Y.Z]. User Guide - N56815740110...

  • Page 79: For Win 98Fe

    ! Right-click on the My computer icon. ! Select Properties, Windows then displays a list of the network components installed. The SAGEM modem is shown in this list, with the software version: SAGEM VVB Ethernet Port vX.Y.Z User Guide - N56815740110...

  • Page 80: For Win 98Se

    ! Right-click on the Network neighborhood icon. ! Select Properties, Windows then displays a list of the network components installed. The SAGEM modem is shown in this list, with the product program version: SAGEM VVB ATM port [version X.Y.Z]. User Guide - N56815740110...

  • Page 81: Troubleshooting The Sagem F@St 1000 Modem

    4. Troubleshooting the SAGEM F@st 1000 modem User Guide - N56815740110 Page 4-1 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 82: Reinstallation Of The Drivers After An Incomplete Installation

    Start / Programs / SAGEM F@st1000 / F@st1000 uninstallation • For Windows XP : Start / All Programs / SAGEM F@st1000 / F@st1000 uninstallation If the F@st1000 Uninstallation command does not exist in the Start menu of Windows, proceed as follows to get it : "...

  • Page 83: For Windows Xp

    ! Select Modem SAGEM USB. ! Right-click and choose Uninstall in the drop-down menu. ! Unplug the modem power supply connector, then restart the installation procedure. User Guide - N56815740110 Page 4-3 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 84: For Windows 2000

    ! Select Modem SAGEM USB. ! Right-click and choose Uninstall in the drop-down menu. ! Unplug the modem power supply connector, then restart the installation procedure. User Guide - N56815740110 Page 4-4 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 85: For Windows Me, Windows 98Fe And Windows 98Se

    The following screen appears. ! Select SAGEM USB Modem, then Remove. ! Unplug the modem power supply connector, then restart the installation procedure. User Guide - N56815740110 Page 4-5 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 86: Interpreting The Leds

    1000 modem Interpreting the LEDs Four indicator lights on the front of the SAGEM F@st™ 1000 let you see the progress of the WAN connection and follow the operation of the modem at the same time. Ignore these indicator lights in the first seconds after starting the modem, because they are not yet stable.

  • Page 87: Pwr" Led Off

    4.3.5 "DATA" LED off ! Check that the SAGEM F@st™ 1000 is correctly connected to the ADSL line (LINE LED lit). ! Check that the pins of the RJ11 connector are neither damaged nor worn. ! Check with your Internet Access Provider that the ADSL mode has been activated on the telephone line that you want to use.

  • Page 88: All Leds Lit

    (with data) (without data) ! If they do, a link is theoretically set up between your SAGEM F@st™ 1000 and the wide area network. ! If not, refer to section 4.3. However, you may have problems accessing a WEB page or a remote machine.

  • Page 89: Problems With Your Network's Analog Terminals

    ! Check that the input splitter or the microfilter associated with the terminal is correctly connected. Malfunctioning analog fax or modem: ! Check that the input splitter or microfilter associated with the terminal is correctly connected. User Guide - N56815740110 Page 4-9 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 90 User Guide - N56815740110 Page 4-10 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 91: Appendice

    5. Appendice User Guide - N56815740110 Page 5-1 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 92: Sagem F@St™ 1000 Interfaces

    The "USB" interface is connected to the equipment via a type B USB socket. Pin N° Signal Meaning PC power supply (+) - Data Subscriber line signal + Data Subscriber line signal Ground Ground User Guide - N56815740110 Page 5-2 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 93: Line" Connector Pinout

    Pin N° Signal Meaning LINE-A Subscriber line A signal LINE-B Subscriber line B signal Not connected Not connected Not connected Not connected User Guide - N56815740110 Page 5-3 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 94: Wiring Of Sagem F@St™ 1000 Cables

    5 - Appendice Wiring of SAGEM F@st™ 1000 cables 5.2.1 RJ11 / RJ11 LINE cable User Guide - N56815740110 Page 5-4 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 95: Type A / Type B Usb Cable

    5 - Appendice 5.2.2 Type A / Type B USB cable 1500 1,5 m User Guide - N56815740110 Page 5-5 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 96: Technical Specifications

    : 188 mm Depth : 142 mm Thickness : 45 mm Weight 800 g Desktop Installation (*) Depending on the installed software. User Guide - N56815740110 Page 5-6 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 97: Environmental Specifications

    Operation Class T 3.2 Physical/chemical environment Standard ETS 300 019-1 Warehousing Class T 1.2 Transport Class T 2.3 Operation Class T 3.2 User Guide - N56815740110 Page 5-7 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 98 EN 60950 and Amendments A1, A2, A3, A4 and A11 Hardware Processor Helium (Virata) ADSL circuit ASCOT (STM) Marking Packaging ETS300 019-1-2, class T 2.3 User Guide - N56815740110 Page 5-8 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 99: Software Specifications

    In the interests of constantly improving the quality of its product, E reserves the Note: right to upgrade any or all of the above specifications without prior notice. User Guide - N56815740110 Page 5-9 eproduction or communication without the written consent of SAGEM SA No r...

  • Page 100: List Of Abbreviations

    Safe Extra Low Voltage Transmission Control Protocol Telecommunication Network Voltage Universal Service Bus Virtual Channel Identifier Virtual Path Identifier Virtual Private Network Wide Area Network User Guide - N56815740110 Page 5-10 eproduction or communication without the written consent of SAGEM SA No r...
  • Page 102 Tel. : +33 1 40 70 63 63 - Fax : +33 1 40 70 66 44 http : /www.sagem.com SAGEM SA - Société anonyme à directoire et conseil de surveillance au capital de 36 235 876 € - Siège social : 27, rue Leblanc - 75512 PARIS CEDEX 15 - 562 082 909 R.C.S. PARIS...

This manual is also suitable for:

F@st 1000

Table of Contents