1241 equipment. When description is addressed to a type of quite precise equipment, the name of this equipment will be mentioned. By defect all the functions described on the SAGEM F@st 1201 are also available on the SAGEM F@st 1241.
Troubleshooting Annex B CE compliance declaration Annex C Environment Annex D Technical Characteristics Annex E Default configuration Glossary Annex F Connection technology Annex G SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 0-2 Sagem Communication document. Reproduction and disclosure prohibited...
Installing and configuring an additional computer 3-12 4. Configuration of network parameters 5. Information / Configuration Accessing the welcome screen Recommendations ADSL connection status Display frame SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 0-3...
Page 6
5-70 5.10.3.2 IP Address 5-71 5.10.3.3 Passwords 5-73 5.10.4 Update Software 5-74 5.10.5 Save/Reboot 5-75 6. Internet access service Introduction Connection for Internet access SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 0-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 7
Application and protocols E. Annex E - Default configuration Default username and password Default configuration for the local network(LAN) Default configuration for the remote network (WAN) SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 0-5...
Page 8
G. Annex G - Connector Technology Pinouts of the "LINE" connector Pinouts of the "PWR" connector Pinouts of the "ETH" connector Pinouts of the "USB" connector SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 0-6 Sagem Communication document. Reproduction and disclosure prohibited...
This section covers presentation of the SAGEM F@st 1201/1241 equipment § 1.1 composition of the packaging § 1.2 required hardware and software § 1.3 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 1-1...
1241 products adapt the ADSL function respectively for POTS (UIT G.992.1/3/5 - Annex A) and for ISDN (UIT G.992.1/3/5 - Annex B). Figure 1.1 - Supervising your router SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 1-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 11
VPN passthrough (IPSec, IKE, PPTP, L2TP), CUSeeMe, RealAudio, Microsoft IM and others, Firewall, Spanning tree, HTTP server for easy configuration, Manual update of the application version locally. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 1-3...
1 blue USB Type A male/Type B male cable (length = 1.5 m), 1 Quick Installation Guide, 1 Installation CD-ROM, microfilter(s) (option), 1 filter/splitter (option). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 1-4 Sagem Communication document. Reproduction and disclosure prohibited...
• the application for installing the USB interface. • the present Reference Manual (SAGEM F@st™ 1201/1241) in PDF format file. • the CE declaration of the chosen router. Incomplete or damaged supply. If on its receipt the equipment is damaged or incomplete, contact the Supplier of your router.
§ 2.2 connecting to a power socket § 2.2.1 connecting the line cable § 2.2.2 connecting your computer § 2.2.3 installation instructions § 2.3 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-1...
The front face has four display LEDs (cf.§ 2.1.2). The base has the LEDs ideograms, SAGEM's mark and logo or the operator's marking as well. Below the base a label is glued on which the product's identification code, the series number and a barcode are shown.
On/Off switch. Miniature jack fixed connector. This connector enables the router to be supplied with direct current from a mains adapter unit. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-3...
"PPP" connection is established, • lits red when the "PPP" connection is not established, • blinks when traffic is detected on the WAN interface. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 2-4 Sagem Communication document. Reproduction and disclosure prohibited...
2 - Description and connection of your router Connecting the ports of your router Figure 2.2 - Interconnection of ports of SAGEM F@st 1201/1241 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-5...
First connect the end of the mains cord, supplied with the equipment, to the base of your router. Connect the mains adapter to a nearby mains wall socket. Set the "On/Off" switch to On. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 2-6 Sagem Communication document. Reproduction and disclosure prohibited...
Connect the other end of this cable to the connector marked ADSL on the micro-filter connected to the RJ11 telephone wall socket of your home. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-7...
USB of your router, Connect the other end of the cable fitted with a type A connector (rectangular fixed connector) to your computer. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 2-8 Sagem Communication document. Reproduction and disclosure prohibited...
Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the yellow Ethernet fixed connector marked of your router, Connect the other end of the cable to your computer. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 2-9...
It is prohibited to open the case. Only qualified personnel approved by your supplier may do Do not use liquid or spray cleaning agents. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 2-10 Sagem Communication document. Reproduction and disclosure prohibited...
§ 3.1 computer (Ethernet). installing your router in the USB port of your computer. § 3.2 installing an additional computer. § 3.3 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-1...
Page 26
If this screen does not appear: Select, in the menu Start, the command Execute, then enter: <letter of CD-ROM drive> :\autorun.exe (for example, e:\autorun.exe) then click OK. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 27
The installation of your router using different interfaces is described in detail below in the order displayed on the previous screen (choice of connection mode). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-3...
The screen opposite appears. Make the connection of the ADSL line as described on the screen. Click button to continue the installation. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 29
The screen opposite appears and asks you to wait. The screen opposite appears. Please wait during the diagnostics of the connection to the Router via an Ethernet cable. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-5...
Page 30
The screen opposite appears. The installation has been correctly accomplished; your router is operational. Click button to close the window. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-6 Sagem Communication document. Reproduction and disclosure prohibited...
Page 31
3 - Installing and configuring the router The "SAGEM" welcome screen appears. You can now use your Internet access. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-7...
The screen opposite appears. Make the connection of the ADSL line as described on the screen. Click button to continue the installation. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-8 Sagem Communication document. Reproduction and disclosure prohibited...
Page 33
Connect the USB cable as described on the screen. The screen opposite appears. Please wait during the diagnostics of the connection to the Router via a USB cable. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-9...
Page 34
The screen opposite appears. The installation has been correctly accomplished; your router is operational. Click button to close the window. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-10 Sagem Communication document. Reproduction and disclosure prohibited...
Page 35
If you wish to install your router with another interface, you must imperatively uninstall your router. To do this: Select Start/All programs/SAGEM F@st™ 1201/Uninstall SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 3-11...
Together with configuration of the router (connection identifier, connection password, etc.). are no longer to be accomplished when installing an additional computer, whatever the interface (Ethernet or USB). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 3-12 Sagem Communication document. Reproduction and disclosure prohibited...
This section covers configuring as a DHCP client Page 4-3 reading data of the DHCP server Page 4-4 reading data of the DHCP client Page 4-6 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 4-1...
Page 38
It is imperative that your computer is configured as a DHCP client or that it has a fixed IP address in the configuration range defined by the DHCP server. Configuration as a DHCP client is the more commonly used solution. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 4-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 39
"Obtain an IP address automatically" and the command "Obtain the addresses of the DNS servers automatically". • Click button OK to confirm your choice. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 4-3...
Page 40
IP address of the router) to access the welcome screen, • Click the "LAN" menu of the heading Advanced Setup; the following screen appears: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 4-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 41
This IP address must belong to the same sub-network as that of the local network. Leased Time (hour) Displays the period for obtaining (in hours) an IP address for a terminal. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 4-5...
Page 42
Click button Start, select Execute, enter cmd and then click OK; the command prompt screen appears. Enter ipconfig /all (or ipconfig/all) then confirm by pressing Enter. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 4-6 Sagem Communication document. Reproduction and disclosure prohibited...
"Password" field. Then click on to confirm. Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the screen. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 45
You can modify the password to access your router's configurer to optimise the safety of your network. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-3...
3) All the fields in the different screens are explained in a table. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-4 Sagem Communication document. Reproduction and disclosure prohibited...
Displays the nominal down line transmission rate Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed Allows your router to be started SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-5...
Remote network IP address (WAN) Default gateway address Default Gateway Primary DNS server address Primary DNS Server Secondary DNS Server Secondary DNS server address SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-6 Sagem Communication document. Reproduction and disclosure prohibited...
"Rerun Diagnostic Tests" at the bottom of the "Help" page, to check that the test has been conclusive. If the test still displays "FAIL", you must follow the troubleshooting procedure displayed on this page. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-7...
Page 50
5 - Information / Configuration • Select the Diagnostics menu in the Status section; the following screen opens: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-8 Sagem Communication document. Reproduction and disclosure prohibited...
If the message "There is no ppp connection" appears, this means that the remote network (WAN) parameters have not been filled in (cf. § - 5.8.1 - Advanced Setup / WAN). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-9...
(WAN) to computers on the local network (LAN) via the Internal Ports. • Select the Port forwarding menu in the section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-10 Sagem Communication document. Reproduction and disclosure prohibited...
Page 53
This internal end port (LAN side) is associated with the external end port (WAN) side. Note: This cannot be modified. Server IP Address Computer address delivered by your router's DHCP server. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-11...
Page 54
5 - Information / Configuration • Click on the Add button; the following screen appears: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-12 Sagem Communication document. Reproduction and disclosure prohibited...
Page 55
When you allocate a number to an "External Port Start", the same number is automatically allocated "Internal Port Start" identically "External Port End", SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-13...
Page 56
The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569 (WAN side) and via the internal ports 3568 and 3569 (LAN side). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-14 Sagem Communication document. Reproduction and disclosure prohibited...
Note: Click on the Save/Apply button to take account of the address or its erasure. The "DMZ" zone is deactivated by default. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-15...
Object: This menu is associated with the remote network. It is used to display the list of all the configured PVCs, to add PVCs or remove them. • Select the menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-16 Sagem Communication document. Reproduction and disclosure prohibited...
Page 59
This function enables the distribution of Multicast datagrams over the local network (LAN) and interaction between the router and the local network hosts. • Click on the Add button to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-17...
Page 60
Non Realtime VBR : Variable Bit Rate Realtime VBR : Variable Bit Rate This value is delivered to you by your Internet Service Provider (ISP). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-18 Sagem Communication document. Reproduction and disclosure prohibited...
Page 61
PPP over ATM (PPPoA) Field Action Default Encapsulation Mode Select the encapsulation of your choice from the VC/MUX scroll down list. • VC/MUX, • LLC/ENCAPSULATION. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-19...
Page 62
VC/MUX. Bridging Field Action Default Encapsulation Mode Select the encapsulation of your choice from the LLC/SNAP- scroll down list. BRIDGING • LLC/SNAP-BRIDGING, • VC/MUX. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-20 Sagem Communication document. Reproduction and disclosure prohibited...
Page 63
MSCHAP. Dial on demand Check the box to connect to Internet only for (with idle timeout timer) "Traffic" on the ADSL line. Not checked SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-21...
Page 64
This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). This field only appears when the "Use Static IP Address" field is activated (box checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-22...
Page 65
For example: pppoa_0_35_1. Note: You may enter another service name. • Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-23...
Page 66
Displays the status of the firewall: Enabled Firewall IGMP Multicast Displays the status of the IGMP function: Disabled • click on the button to save the WAN interface configuration. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-24 Sagem Communication document. Reproduction and disclosure prohibited...
Page 67
1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE session is interrupted. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-25...
Page 68
The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-26 Sagem Communication document. Reproduction and disclosure prohibited...
Page 69
For example: pppoe_0_35_1. Note: You may enter another service name. Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-27...
Page 70
Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-28 Sagem Communication document. Reproduction and disclosure prohibited...
Page 71
This field only appears when the "Use the following IP address:" field is activated (box checked). This field only appears when the "Use the following default gateway:" field is activated (box checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited...
Page 72
Secondary DNS server Enter a secondary server DNS Address. This field only appears when the "Use the following DNS server addresses:" field is activated (box checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-30 Sagem Communication document. Reproduction and disclosure prohibited...
Page 73
This name, which is allocated automatically, is made up as follows: Protocol_VPI_VCI_Index For example: mer_0_35_1. Note: You may enter another service name. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-31...
Page 74
Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-32 Sagem Communication document. Reproduction and disclosure prohibited...
Page 75
If you check this box, you must enter DNS server addresses: server addresses. Primary DNS server Enter a primary server DNS Address. Secondary DNS server Enter a secondary server DNS Address. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-33...
Page 76
For example: ipoa _0_35_1. Note: You may enter another service name. • Click on the Next button to continue configuring the remote network (WAN) in IPoA mode. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-34 Sagem Communication document. Reproduction and disclosure prohibited...
Page 77
Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled IGMP Multicast Displays the status of the IGMP function: Disabled SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-35...
Page 78
Enter the IP address of the external network of the "Set Top Box" connected virtually to this "PVC". SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-36 Sagem Communication document. Reproduction and disclosure prohibited...
Page 79
Displays the status of the firewall: Disabled IGMP Multicast In the "Bridge" connection, this field is: Not Applicable • click on the button to save the WAN interface configuration. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-37...
Enable IGMP Snooping Group Management Protocol) protocol. This not checked lets you manage the declarations of belonging to one or more groups with Multicast routers. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-38 Sagem Communication document. Reproduction and disclosure prohibited...
Page 81
This field only appears when the "Enable DHCP" field is activated (box checked). This field only appears when the "Configure the second IP Address and Subnet Mask for LAN interface" field is activated (box checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-39...
Source IP address / Subnet mask. Source Port Source port Destination IP address / Subnet mask. Dest. Address / Mask Dest. Port Destination port. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-40 Sagem Communication document. Reproduction and disclosure prohibited...
Page 83
Enter a "destination" port (WAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-41...
By default, all the incoming data is refused when the Firewall is activated. • Select the Incoming sub-menu in the Security menu in the Advanced Setup section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-42 Sagem Communication document. Reproduction and disclosure prohibited...
Page 85
Enter a "destination" port (LAN) or range of ports. Dest. Port (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-43...
(pppoe_8_35_1 for example). Interface used this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-45...
Field Meaning Destination Remote network IP address Subnet Mask Remote subnet mask Gateway Default gateway of the remote network Interface Remote network interface SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-46 Sagem Communication document. Reproduction and disclosure prohibited...
Page 89
Empty Use Interface Select the interface you want to use from Box checked the scroll down list (pppoe_8_35_1 for Interface example). used SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-47...
Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Enable Automatic Assigned DNS" field is deactivated (box not checked). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-48 Sagem Communication document. Reproduction and disclosure prohibited...
Box checked AnnexL Enabled Box checked ADSL2+ Enabled Box checked AnnexM Enabled Box not checked Check the boxes according to the characteristics of your line. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-49...
Click on the Advanced Settings button to display the following screen: Field Default Normal Selected box Reverb Box not selected Medley Box not selected No retrain Box not selected Box not selected SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-50 Sagem Communication document. Reproduction and disclosure prohibited...
Page 93
All the tones are selected by default. To select a tone, simply check the associated box. To not select a tone, simply leave its associated box empty. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-51...
Object: This menu is used to display all the parameters which concern the remote network. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-52 Sagem Communication document. Reproduction and disclosure prohibited...
Object: This menu is used to display all the parameters which concern the local network (LAN). • Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-53...
Object: This menu is used to display all the parameters which concern the remote network (WAN). • Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-54 Sagem Communication document. Reproduction and disclosure prohibited...
Object: This menu is used to display all the ATM statistics of the line. • Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-55...
Object: This menu is used to display all the ADSL statistics of the line. • Select the ADSL sub menu in the Statistics menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-56 Sagem Communication document. Reproduction and disclosure prohibited...
Object: This menu is used to display all the information concerning your router's routing. • Select the Route menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-57...
Address Resolution Protocol). This lets you find out the physical address of a computer's network card, corresponding to an IP address. • Select the menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-58 Sagem Communication document. Reproduction and disclosure prohibited...
Object: This menu is used to display all the computers which obtained an IP address from the router's DHCP server. • Select the DHCP menu in the Advanced Status section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-59...
This menu contains the following three sub menus: • Backup (cf. § 5.10.1.1), • Update (cf. § 5.10.1.2), • Restore Default (cf. § 5.10.1.3). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-60 Sagem Communication document. Reproduction and disclosure prohibited...
It is recommended to save the current configuration on your computer to a file • Select the Backup sub menu in the Settings menu of the Management section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-61...
Page 104
Click on the Save button to save the current configuration file, for example, on your computer. • Select the directory where you want to save the "backupsettings.conf" configuration file. The process takes a few seconds. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-62 Sagem Communication document. Reproduction and disclosure prohibited...
Select the configuration file then click on the Update Settings button to recover a configuration which has already been saved. The process takes around 2 minutes. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-63...
Click on the OK button if you really want to return to the factory configuration. A few moments after, the screen of the "Internet Connection" menu appears. To refer to paragraph 5.6. The process takes around 2 minutes. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-64 Sagem Communication document. Reproduction and disclosure prohibited...
Object: This menu is used to view and/or configure the events which occur on your router. • Select the System Log menu in the Management section to display the following screen: SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-65...
(see table in the next paragraph - "Configure System Log"). • Click on the Save button to save all the events allocated to the severity you configured. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-66 Sagem Communication document. Reproduction and disclosure prohibited...
5 - Information / Configuration Configure System Log • Click on the Configure System Log button to configure the events which occur on your router. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-67...
Page 110
"View System Log" button. The severities are classified in decreasing order of importance. • Emergency, • Alert, • Critical, • Error, • Notice, • Informational, • Debugging. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-68 Sagem Communication document. Reproduction and disclosure prohibited...
Page 111
Server UDP Port Enter the number of the port associated with the "Syslog" server. This field only appears when the mode selected is "Remote or "Both". SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-69...
(WAN). Note: The ICMP service is always activated on the local network (LAN) and may be activated or deactivated on the remote network (WAN). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-70 Sagem Communication document. Reproduction and disclosure prohibited...
Field Action Default Select Enable to activate the access control Access Control Mode Box not mode or Disable to not activate it. checked SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-71...
Page 114
Click on the Add button to add an IP address. Note: From this address you may access the local management services when the access control is active. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-72 Sagem Communication document. Reproduction and disclosure prohibited...
New Password Enter your new password Confirm Password Confirm your new password Note: The password is a string of a maximum of 16 alphanumerical characters. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-73...
The process takes around 2 minutes. The application of a new software version for the router does not modify the current configuration at all. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-74 Sagem Communication document. Reproduction and disclosure prohibited...
Click on the Save/Reboot button to restart the router. The process takes around 1 minute. A countdown is displayed to tell the user how long is left to wait. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 5-75...
Page 118
5 - Information / Configuration SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 5-76 Sagem Communication document. Reproduction and disclosure prohibited...
6. Internet access service This section covers the introduction § 6.1 connecting to Internet access § 6.2 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 6-1...
• the DNS addresses are correctly configured in each terminal. The router enables DNS queries to be relayed. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 6-2 Sagem Communication document. Reproduction and disclosure prohibited...
6 - Internet access service Connection for Internet access When installation is complete the "SAGEM" welcome page appears. You can now surf the Internet. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 6-3...
Page 122
6 - Internet access service SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 6-4 Sagem Communication document. Reproduction and disclosure prohibited...
7. Updating the application This section covers updating the application version. P 7-2 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page 7-1...
Page 124
To check that the new version has been correctly downloaded, click the command Status/Summary at the top left of the welcome screen of the HTTP configurator. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page 7-2 Sagem Communication document. Reproduction and disclosure prohibited...
ETH). If no address is displayed on screen, click button Apply for the computer to send a DHCP query to the router. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page A-2 Sagem Communication document. Reproduction and disclosure prohibited...
ADSL quickly synchronisation training Blinking Green Line not slowly connected Power USB or ETH line Power not present inactive not present or "Bridge" mode SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page A-3...
Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed. Allows your router to be started. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page A-4 Sagem Communication document. Reproduction and disclosure prohibited...
(PASS in green, DOWN in orange and FAIL in red) and supplies the appropriate troubleshooting procedures. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page A-5...
Page 130
If you experience difficulties connecting to the Internet, we recommend that you restart your router (cf.A.6) or possibly re-establish the factory configuration (cf. § A.7). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page A-6 Sagem Communication document. Reproduction and disclosure prohibited...
Check that the delivered power cord is properly connected at one end to the mains power network. Check that the power connector is inserted correctly in the corresponding connector (power) of the router. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page A-7...
CD-ROM, or to enter again the ADSL connection data supplied by your Internet Service Provider (ISP) (cf. Internet Connection section - § 5.6). SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page A-8 Sagem Communication document. Reproduction and disclosure prohibited...
LAN interface appears in the browser's Address field but the home screen does not appear. The screen opposite appears. Click The screen opposite appears. Click SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page A-9...
Page 134
In the menu bar, select the "File" menu then deselect the "Work Offline" command. Click OK in the browser's "Address" field to display the home screen. When the router is installed, this box is checked. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page A-10 Sagem Communication document. Reproduction and disclosure prohibited...
B. Annex B - Warnings for safety This section covers Warnings for safety § B.1 the CE conformity declaration § B.2 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page B-1...
USB interface port SELV Ethernet port SELV Primary power port Level 3 Telecommunication Network Voltage Safety Extra Low Voltage Circuit Hazardous Primary Voltage circuit SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page B-2 Sagem Communication document. Reproduction and disclosure prohibited...
R&TTE directive. This conformity is presumed through the complete compliance with European harmonised standards. Sagem communication declines all liability if the regulations in force in the place of installation are not followed. The CE conformity declaration of each product (SAGEM F@st...
Page 138
Annex B - Warnings for safety SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page B-4 Sagem Communication document. Reproduction and disclosure prohibited...
C. Annex C - Environment This section covers directive E 2002/96/CE § C.1 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page C-1...
Preservation of the environment as part of a sustainable development logic is an essential concern of Sagem Communication. Sagem Communication‘s aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.
§ D.1 the characteristics of the different interfaces § D.2 environmental characteristics § D.3 the application and the protocols § D.4 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page D-1...
Display Marking Meaning Abbreviatio • Green/Red Power LED ADSL • Green ADSL LED • Green local network (LAN) LED Internet • Green/Red Internet LED SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page D-2 Sagem Communication document. Reproduction and disclosure prohibited...
EN 301 489-17 Ed . 2002 Radio part for ISM band at 2.4 GHz Emission 802.11g/b • ETR 300 328-2 Ed . July 2000 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page D-4 Sagem Communication document. Reproduction and disclosure prohibited...
LAN or WAN port (with specific option) Management • From ETH, USB and WAN (with specific option) Downloading of version • Client by http mode SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page D-5...
Page 146
Annex D - Technical Characteristics SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page D-6 Sagem Communication document. Reproduction and disclosure prohibited...
§ E.1 the default configuration for the local network (LAN) § E.2 the default configuration for the remote network (WAN) § E.3 SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page E-1...
The LAN traffic is routed to your ISP NAT/PAT Activated Default configuration for the remote network (WAN) Designation Value Linking protocol PPPoA DNS relay DHCP server ADSL/ADSL2/ADSL2+ Multimode SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page E-2 Sagem Communication document. Reproduction and disclosure prohibited...
F. Annex F - Glossary SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-1...
Page 150
Local Area Network Link Control Protocol Logical Link Control (encapsulation avec en-tête) Medium Access Control Media Dependent Interface MAC Encapsulation Routing Maximum Transfer Unit SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page F-2 Sagem Communication document. Reproduction and disclosure prohibited...
Page 151
TELecommunication NETwork TFTP Trivial File Transfer Protocol Unspecified Bit Rate User Datagram Protocol Uniformed Resource Locator Universal Serial Bus Unshielded Twisted Pair Voice Activity Detection SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page F-3...
Page 152
Virtual Path Virtual Path Identifier Virtual Private Network Wide Area Network Meshed network of information servers Weighted Fair Queuing WLAN Wireless Local Area Network SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page F-4 Sagem Communication document. Reproduction and disclosure prohibited...
The mains unit is connected to the equipment using the miniature fixed connector of the case. Signal Meaning Internal +7.5 V DC "+" connection External Earth DC "-" connection SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page G-2 Sagem Communication document. Reproduction and disclosure prohibited...
Not connected Not connected The Ethernet port is self-detecting. You can use either straight or crossed cables. An emission or reception signal is detected automatically. SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Sagem Communication document. Reproduction and disclosure prohibited Page G-3...
The "USB" interface is connected to the equipment using a type B female USB fixed connector. Contact N° Signal Meaning PC power (+) - Data Subscriber line signal + Data Subscriber line signal Ground Earth SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01 Page G-4 Sagem Communication document. Reproduction and disclosure prohibited...
Page 158
Siège social : 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE Tél. : +33 1 58 11 77 00 - Fax : +33 1 58 11 77 50 http://www.sagem.com Société Anonyme au capital de 300 272 000 € - 480 108 158 RCS Paris...