Last Unit Weight Used Feature - A&D FC-50Ki Instruction Manual

1-6. Last Unit Weight Used Feature

1-6. Last Unit Weight Used Feature 1-6. Last Unit Weight Used Feature 1-6. Last Unit Weight Used Feature
There are a number of ways to register a unit weight to count. The FC-i scale has a
feature to keep the last unit weight used in memory. This can be handy if you turn the
scale display off and then want to return to the same unit weight, or you accidentally
clear the unit weight by pressing the RESET key.
When a unit weight is registered it is automatically placed in the ID "id-000000" and
remains there until a new unit weight is entered, or the power is disconnected. It can be
recalled by the following:
1. When the three UNIT WEIGHT BY LED's
are blinking at display ON, or if the RESET
key has been pressed;
2. Press the ID key.
"id-000000" will be displayed
with ï000000ðblinking.
3. Press the ENTER key.
The scale will recall the previous
unit weight.
Automatic Last Unit Weight Used Automatic Last Unit Weight Used Automatic Last Unit Weight Used Automatic Last Unit Weight Used
When you turn the display on, the scale can automatically recall the last unit weight
used from memory, if desired.
q Set the F-Function f-01-04 at "1". The scale will recall the last unit weight used,
when the display is turned ON.
STABLE
# #
8888810
ID.
!
W 2 W E I G H T ( k g )
12 34 56 17 89
!
2 3 S A M U U W ( g )
12 34 56 70. 00 00 0
# #
------0
ENTER
!
W 2 W E I G H T ( k g )
12 34 51 6- --
!
2 3 S A M A U
12 34 56 17
6
UNIT WEIGHT BY
TARE
ZERO
M+
TOTAL
ENTERED
# # # # #
0. 0 00 45 78i d -0 00 00 0
# # # # #
0. 0 00 45 68i d -0 00 00 0
U W ( g )
12. 00 00
SCALE
&&
F?I
&&
F?I