F-Functions - A&D FC-50Ki Instruction Manual

6. Press the ENTER key to save any
changes and/or move to next.
7. When finished: Press the STANDBY/OPERATE
key to exit. Then, press it to turn the display back
on. New settings will operate as set.

9-2. F-Functions

9-2. F-Functions
9-2. F-Functions 9-2. F-Functions
q "!" designates factory settings.
F-00-X Weight Unit F-00-X Weight Unit F-00-X Weight Unit F-00-X Weight Unit
f-00-01 f-00-01 f-00-01 f-00-01
F-01-X Operations F-01-X Operations F-01-X Operations F-01-X Operations
f-01-01 f-01-01
f-01-01 f-01-01
f-01-02 f-01-02
f-01-02 f-01-02
q Weight Display.
0 0 0 0
kg (kilograms).
1 1 1 1
! lb (pounds).
q Operation Mode.
0 0 0 0
! Normal operation. All features and keys available.
Simplified operation. Unit weight registration is by sample
1 1 1 1
only. All other keys are disabled.
q "Add" Sample Request Override.
If the sample weight is too light and the scale asks to "Add"
more sample pieces, using this F-Function, the unit weight
can be entered without adding the requested sample pieces.
Or disable the "Add" sample request function.
"Add" sample request function is disabled. Light unit weight
0 0 0 0
can be accepted without "Add" more sample request.
Unit weight can be entered without requested "Add" sample
1 1 1 1
!
pieces (via the ENTER key).
Unit weight cannot be entered without requested "Add"
2 2 2 2
sample pieces (via the ENTER key).
# #
f-05-02
C o m p a r a t o r
ENTER
12 34 56 78 C0 00 04 56 78i d -0 00
!
2 3 S A M U U W ( g ) 1 2 C l e a r I D
12 34 56 70. 00 00 04 56 789 0 12 34 56 7
33
# # # # #
STANDBY
OPERATE
USA Version ONLY
&&
F?I
000