A&D FC-50Ki Instruction Manual page 38

F-04-X Environment and Beeper F-04-X Environment and Beeper F-04-X Environment and Beeper F-04-X Environment and Beeper
f-04-01 f-04-01 f-04-01 f-04-01
f-04-02 f-04-02
f-04-02 f-04-02
f-04-03 f-04-03
f-04-03 f-04-03
f-04-04 f-04-04 f-04-04 f-04-04
F-05-X Comparator F-05-X Comparator F-05-X Comparator F-05-X Comparator
f-05-01 f-05-01 f-05-01 f-05-01
f-05-02 f-05-02 f-05-02 f-05-02
q Zero Tracking.
Zero tracking traces a drift from zero caused by temperature
changes etc., and stabilizes the zero point.
0 0 0 0
! Zero tracking ON.
1 1 1 1
Zero tracking OFF.
q No Operation
1 1 1 1
! This setting should be "1".
q Stable Detection Speed / Environment
0 0 0 0
Fast stable detection (good environment).
1 1 1 1
! Normal.
2 2 2 2
Slow stable detection (poor environment).
q No Operation
0 0 0 0
! This setting should be "0".
q Comparator Mode.
0 0 0 0
! comparator off.
1 1 1 1
compare all data.
2 2 2 2
compare stable data.
3 3 3 3
compare all data except when near zero*.
4 4 4 4
compare stable data except when near zero*.
5 5 5 5
compare all positive data except when near zero*
6 6 6 6
compare stable positive data except when near zero*.
* "near zero" means between –4d and +4d of weight data.
q Data to Compare – Count or Weight
0 0 0 0
! Compare count data.
1 1 1 1
Compare weight data.
36