A&D FC-50Ki Instruction Manual page 36

q Auto REMOTE SCALE After Unit Weight Registration.
f-01-03 f-01-03 f-01-03 f-01-03
F-01-03 requires
OP-05 and a
remote scale
q Display ON Unit Weight – Reset or Last.
f-01-04 f-01-04 f-01-04 f-01-04
q ID Memory Contents.
f-01-05 f-01-05
f-01-05 f-01-05
q Unit Weight With A 2 Scale System.
f-01-06 f-01-06 f-01-06 f-01-06
F-01-06 requires
OP-05 and a
remote scale
The scale can be set to the remote scale after unit weight
registration, instead of having to manually press the
REMOTE SCALE key. Please note that this does not affect
any other use of the REMOTE SCALE key.
0 0 0 0
! No automatic switching.
1 1 1 1
Automatic switching to the remote scale.
2 2 2 2
Automatic switching to the main scale.
When the display is turned on, the scale can be set to recall
the last unit weight used.
Please note that if power is interrupted (such as the AC
adapter removed), the last Unit Weight cannot be recalled.
0 0 0 0
! Unit weight is RESET (cleared) when display comes on.
Unit weight last used (before display is turned off, not power
1 1 1 1
interrupt) will be entered automatically.
The scale ID memory can contain unit weights with tare
weights, comparator limits and total count, or just unit weights
alone. Item codes are always contained.
000 000 000 000
! ID memory contains unit weight and item code only.
You select which data to be stored by keying in a
TOTAL TARE
count Weight
0 or
limits or total count.
000 000 000 000
Example: Key in
memory contains unit weight including item code
Comparator
and comparator limits.
limits
When operating a 2 scale system, the remote scale may have
an independent unit weight, or restricted to the same as the
main scale.
0 0 0 0
Each scale can have its own unit weight.
1 1 1 1
! Main and remote scales have the same unit weight only.
1 for the data: tare weight, comparator
0 1
34
0 to display 010, ID