Connecting To The Mains Supply - JVC TH-WL707HX Instruction Manual

Connecting to the Mains Supply

The soundbar and subwoofer are designed to operate with the supplied mains adapter and
mains cables.
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is firmly inserted into the mains socket.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
• The mains adapter and mains cable are designed for this JVC soundbar only. DO NOT use the mains
adapter and mains cable for other purposes.
Soundbar
Unwind the mains adapter cable to its full length. Connect mains cable to the mains
adapter and then connect to the
mains socket at the other end. Make sure the mains adapter is fully inserted into the mains
socket.
Subwoofer
Connect the other end of the mains cable to the AC 100-240V socket at the rear of the
subwoofer then connect the mains plug to the mains socket.
Rear View of the Subwoofer
15V
Rear View of the Unit
Power
PAIR
AC 100-240V~
ON OFF
2A socket on the rear of the unit and a
To the
mains socket
To the
mains socket
15