8. Tighten the carrier
Figure 3-9
9. Place the positioner and the mount on the actuator carefully. One of the two pins
coupling wheel
Figure 3-10
When using the stainless steel coupling (article number TGX: 16300-1556): Place the
positioner and the mount on the actuator carefully. Place the stainless steel coupling on
the actuator shaft.
SIPART PS100
Operating Instructions, 10/2018, A5E45863537.-AA
②
using the cylinder head screw
Carrier
①
must fit in the carrier
Orientation of mount
3.3 Mounting to part-turn actuator
⑦
and the washer
②
when you do this.
Installing and mounting
⑧
.
⑫
of the
15