Emptying The Dust Cup - Sharp EC-A1RAS Operation Manual

EMPTYING THE DUST CUP

VACUUMING
Guide for disposing
Flow of cleaning process
When the level of the accumulated
Control
dirt reaches the "MAX" line.
switch
MAX
Dispose of the dirt before the level of the
accumulated dirt exceeds the height of the
line, even when the dirt is leaning on one
side or the other.
Disposing of dirt is recommended after
each cleaning session, for the purpose of
hygiene.
Notices
When the Filter care lamp (red)
is turned on*
(Red: Turned on)
Safety Stop
The Rotary brush stops automatically for safety
purpose when the Suction head (roller switch on the Dispose of the dirt in the Dust Cup and
EN-17
bottom side follow the procedure described on the right
The operation does not stop in such instances. to remove the dirt on the Mesh filter. If the
The rotation restarts when the Suction head contacts lamp still does not turn off, clean the unit.
the floor and moved. EN-15, 16
Do not touch the Rotary Brush or Roller Switch while the operation is
The lamp may also turn on when the Suction head is
CAUTION
temporarily suspended.
blocked (when cleaning a mat or when using an
[Risk of injury when the Rotary brush starts to operate]
enclosed nozzle and the like) even when the filter is
not dirty. In such instances, press the Be sure to press the
restart operation to turn the lamp off.
head.
Tips
Continuing to operate the product without
disposing of the accumulating dirt results in the
deterioration of the suction power due to the
attachment of the dirt on the Mesh filters. Be sure
to dispose of the dirt.
Continuing to operate the product without
disposing of the dirt may lead to the product
malfunction.
Dispose of the dirt on newspapers or over a dirt
bin. [Dust could spill out]
EN-9 EN-13
EC-A1RA_Eng_A4(ai sorted).indd 13
of dirt
Start
The mode toggles between the "High mode" and the "Standard
mode" each time it is pressed.
High mode: When cleaning with maximum suction power.
Mesh filter
Standard mode: When cleaning with subdued suction power.
"MAX" line
MAX
Finish
Cleaning
completed
The Rotary brush of the Suction head automatically turns when the cleaning starts.
Even when a cleaning session is completed in the Standard mode, the operation starts with the
High mode if the is pressed the next time.
When the remaining charge in the battery becomes depleted while operating, the operation is
automatically stopped to prevent excessive discharge that can deteriorate battery. Always charge
the battery each time the product is used for cleaning, regardless of how long it was used.
) is off the floor while cleaning.
to stop the operation when cleaning the Suction and then
Removal
Removing the Dust cup assembly
Cup release lever
Pull the
while standing the vacuum
cleaner body vertically.
(When a mat or a rug tends to block the Suction head,
Cup release lever
for instance.)
Charging the
Disposing of dirt is recommended
battery
after each cleaning session, for the
EN-7
purpose of hygiene.
Removal
Removing the Cleaning Brush
It is on the vacuum cleaner body
side after the Dust cup assembly
has been removed.
Pull out from the
position depicted
in the diagram.
EN-13, 14
Cleaning is not
required for the built
in filter.
Do not remove the
filter.
Even when the Suction
head contacts the floor if
the Roller Switch is off the
floor the operation is
temporarily suspended.
2017/07/07 11:43:20