Troubleshooting - Hyundai HYM40Li330P Instruction Manual

Troubleshooting

Fault
Motor does not start
Motor performance
drops
Unclean cuts
Possible Cause
1. Capacitor defective
2. Battery pack empty
3. Cable defective
4. Switch/plug block defective
5. Motor terminals or capacitor
disconnected
6. Mower standing in high grass
7. Mower housing is clogged
8. Safety key is not inserted
9. Battery is not correctly inserted
1. Grass too tall or damp
2. Mower housing is clogged
3. Blades badly worn
4. Battery performance decreasing
1. Blades worn
2. Wrong cutting height
Remedy
1. Contact an authorised
service centre
2. Charge the battery pack
3. Check the cable
4. Contact an authorised
service centre
5. Contact an authorised
service centre
6. Start motor on shorter
grass or previously mowed
area; change cutting height if
necessary
7. Clean housing so that the
blade can run freely
8. Insert safety key
9. Remove the battery and
reinsert
1. Correct the cutting height
2. Clean housing
3. Replace blades
4. Check the battery
performance and charge the
battery if necessary
1. Replace or re-sharpen the
blade; contact an authorised
service centre
2. Correct the cutting height
31