Datalogic Jota A6 Touch User Manual page 191

turn off the screen, locking the screen if the device is configured to
do that. If the device's screen is off, clicking the Power button will
resume the device.
4. Back Button
At the bottom of the Remote Control window, the Back button takes
the device to the previously viewed screen or application as if you
had tapped the device's Back button.
5. Scan Button
At the bottom of the Remote Control window, the Scan button
activates the device's barcode scanner as if you had pressed the
Scan Key or the Scan Trigger on the device. There are some
limitations: the scanner will not scan if:
• there is no application running that can receive its data;
• the Camera application is showing its live preview or taking a
photograph or recording a video;
• none of the device's scan buttons are configured to scan.
However, if your device is configured to scan barcodes and an
application is receiving the data, then the Scan button will trigger a
scan remotely.
6. Save a Screenshot of Remote Device
At the bottom of the Remote Control window, the Save button takes
a screenshot of the remote computer and prompts to save it to your
PC. The default path is your user folder.
User's Manual
Datalogic Applications
183