Power Supply; Laser Safety - Datalogic Jota A6 Touch User Manual

Safety and Regulatory Information

Power Supply

The device is intended to be supplied by a self-contained
rechargeable Lithium Ion battery pack (UL listed LPS/SELV power
source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV
power source which supplies power directly to the unit via the micro
USB connector of the cable.
The device could be also used with Certified Accessories
(Dock/Cradle) which supply Wireless power. The Dock/Cradle
accessories are intended to be supplied by a UL Listed/CSA Certified
Power Unit LPS/SELV rating 12V, min 5A power source which
supplies power via the power connector of the cable.
Any changes or modifications to equipment, not expressly approved
by Datalogic could void the user's authority to operate the
equipment.

Laser Safety

The following information applies to Laser Aiming System, used on
Joya Touch A6 Imager.
The laser light is visible to the human eye and is emitted from the
window indicated in the figure below.
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX OUTPUT RADIATION 1 mW
COMPLIANT WITH EN 60825-1:2007 and EN 60825-1:2014
The artwork below may be only a draft. Please refer to the
label attached to the product for information about
certification marks.
NOTE
244 JOYA™ TOUCH A6