Datalogic Jota A6 Touch User Manual page 166

Datalogic Applications
In most cases you should be able to leave other fields
with their default values. You may, of course, change
those values as needed to work with your network setup.
NOTE
4. Click Print Preview.
5. Click Print in the button bar.
6. Since Print dialog boxes vary by the model of your printer,
configure the print as you normally do. Close these dialog boxes
to exit.
7. Resume the device and unlock its screen.
8. Launch the DXU Agent application.
9. Tap Menu, and then select the Scan2Deploy command.
10. Scan the barcode.
Your device should appear in the Available Device list of the DXU
main window. Click Available Device to continue configuring your
device.
Delete a Device from the Available Device List
Click the exit button (X) located at top right of the device.
158 JOYA™ TOUCH A6