XA00303F-G
Associated documentation
Supplementary
documentation
Manufacturer's certificates
Manufacturer address
Other standards
Extended order code
16
This document is an integral part of the following Operating Instructions:
BA00236F/00
Explosion-protection brochure: CP00021Z/11
The Explosion-protection brochure is available:
• In the download area of the Endress+Hauser website: www.endress.com -> Download ->
Advanced -> Documentation Code: CP00021Z
• On the CD for devices with CD-based documentation
EU Declaration of Conformity
→ 3
EU type-examination certificate
Certificate number:
KEMA 04 ATEX 1153 X
List of applied standards: See EU Declaration of Conformity.
Endress+Hauser Maulburg GmbH+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Phone: +49 7622 28-0
Address of the manufacturing plant: See nameplate.
Among other things, the following standards shall be observed for proper installation:
• IEC/EN 60079-14 : 2012: "Explosive atmospheres - Part 14: Electrical installations design,
selection and erection"
• EN 1127-1 : 2011: "Explosive atmospheres - Explosion prevention and protection - Part 1:
Basic concepts and methodology"
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
FMG60
–
(Device type)
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed
instead of the placeholders.
Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available. The features have a 2-digit
structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists
*************
(Basic specifications)
Gammapilot M FMG60
+
A*B*C*D*E*F*G*..
(Optional specifications)
Endress+Hauser