Endress+Hauser Gammapilot M FMG60 Safety Instructions page 24

XA00303F-G
24
Signal circuit
Connection for U
FHX40 I
o
P
R
C
L
Characteristic
curve: linear

1) Only available at Basic specification, Position 3 (Connect. Power Supply; Connect. Output) = B, E, J, K
2) Only for connection to FMG60 signal circuit Cascade in
3) Only for connection to FMG60 signal circuit Cascade out
Ex ia IIC
= 4.7 V For connection to the approved display FHX40 with
o
= 37.7 mA associated cable (KEMA 02 ATEX 1203) in type of protection
= 44.3 mW intrinsic safety Ex ia IIC or Ex ia IIIC.
o
= 125 Ω Observe associated Safety Instructions XA00193F!
i
= 12.7 nF C = 150 µF
i o
= 0 L = 25 mH
i o
This circuit may also be connected to the approved Service Interface FXA193
with associated connection cable for ToF devices (BVS 03 ATEX E187).
Observe associated Safety Instructions XA00077D!
Output FXA193 with ToF-Cable:
U = 3.74 V, I = 9.9 mA, P
o o
Characteristic curve: linear
For explosion group IIC: L
o
Gammapilot M FMG60
Ex ia IIB Ex ib IIC
= 9.2 mW, C = 0, L = 0;
o i i
< 340 mH, C < 100 µF
o
Endress+Hauser
Ex ib IIB