Advertisement
These mounting instructions are a summary of KTR N 45510 comprising details about the as-
sembly/disassembly of the intermediate shaft coupling ROTEX
the instructions KTR N 45510 for general advice as well as advice on safety and danger before
starting up the coupling. According to EU standard 2014/34/EU, legal claims for warranty can-
not be allowed.
Torsionally flexible intermediate shaft coupling type ZR3
Table of contents
1
Technical data
2
Assembly
2.1
Components of the couplings
2.2
Assembly of type ZR3
2.3
Displacements - alignment of the couplings
2.4
Critical whirling speed
Please observe protection
note ISO 16016.
Summarized assembly instructions
ROTEX
ROTEX
ROTEX
Drawn:
2017-03-15 Shg/Ki
Verified:
2017-03-15 Shg
®
GS
ZR3
®
®
GS
®
GS, ZR3
Replacing:
Replaced by:
KTR-N
45524 EN
Sheet:
1 of 7
Edition:
4
GS ZR3 only. Please refer to
KTR-N dated 2017-01-02
2
4
4
5
5
7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KTR ROTEX GS
Summary of Contents for KTR ROTEX GS
- Page 1 ROTEX GS ZR3 only. Please refer to the instructions KTR N 45510 for general advice as well as advice on safety and danger before starting up the coupling. According to EU standard 2014/34/EU, legal claims for warranty can- not be allowed.
- Page 2 (see table 3). 2) When using the spider 72 Sh-D, we recommend to use hubs made of steel. Drawn: 2017-03-15 Shg/Ki Replacing: KTR-N dated 2017-01-02 Please observe protection note ISO 16016. Verified: 2017-03-15 Shg Replaced by:...
- Page 3 163.3 259.3 Ø42 14.8 21.4 28.7 174.9 277.8 Ø45 14.8 21.4 28.7 296.3 Ø48 20.1 26.9 308.7 Ø50 19.3 25.8 Ø55 23.5 Drawn: 2017-03-15 Shg/Ki Replacing: KTR-N dated 2017-01-02 Please observe protection note ISO 16016. Verified: 2017-03-15 Shg Replaced by:...
- Page 4 With vertical assembly of the intermediate shaft couplings a special distance washer of KTR has to be inserted between the coupling hub at the bottom and the spider at the bottom. 2.1 Components of the couplings ®...
- Page 5 Radial displacements Axial displacements K = L + K - 2 • l - E) • tan α = (L Illustration 5: Displacements Drawn: 2017-03-15 Shg/Ki Replacing: KTR-N dated 2017-01-02 Please observe protection note ISO 16016. Verified: 2017-03-15 Shg Replaced by:...
- Page 6 GS couplings mentioned are general standard values taking into account the load of the coupling up to the rated torque TKN of the coupling and an ambient temperature of + 30 °C. Drawn: 2017-03-15 Shg/Ki Replacing: KTR-N dated 2017-01-02 Please observe protection note ISO 16016. Verified: 2017-03-15 Shg...
- Page 7 ® ROTEX GS 19 Speed 1500 rpm Max. permissible shaft distance dimension 1700 mm Illustration 7: Critical whirling speed of type ZR3 Drawn: 2017-03-15 Shg/Ki Replacing: KTR-N dated 2017-01-02 Please observe protection note ISO 16016. Verified: 2017-03-15 Shg Replaced by:...
Need help?
Do you have a question about the ROTEX GS and is the answer not in the manual?
Questions and answers