KTR CLAMPEX 200 Mounting Instructions

Advertisement

Quick Links

KTR Kupplungstechnik
GmbH
D-48407 Rheine
®
The CLAMPEX
clamping set is a frictionally engaged, detachable shaft - hub connection for cylindrical
shafts and bores without feather key.

General Hints

Please read through these mounting instructions carefully before assembling the clamping set.
Please pay special attention to the safety instructions!
The mounting instructions are part of your product. Please keep them carefully and close to the
clamping set.
The copyright for these mounting instructions remains with KTR Kupplungstechnik GmbH.

Safety and Advice Hints

STOP
D A N G E R !
!
C A U T I O N !
A T T E N T I O N !
P R E C A U T I O N !
General Hints to Danger
D A N G E R !
STOP
With assembly and disassembly of the clamping set it has to be made sure that the
entire drive train is protected against unintentional engagement. You can be
seriously hurt by rotating parts. Please make absolutely sure to read through and
observe the following safety instructions.
• All operations on and with the clamping set have to be performed taking into account "safety first".
• Please make sure to disengage the power pack before you perform your work at the clamping set.
• Protect the power pack against unintentional engagement, e. g. by providing hints at the place of
engagement or removing the fuse for current supply.
• Do not touch the operation area of the machine as long as it is in operation.
• Please protect the rotating drive parts against unintentional touch. Please provide for the necessary
protection devices and caps.

Proper Use

You may only assemble, operate and maintain the coupling if you
• carefully read through the mounting instructions and understood them
• had technical training
• are authorized to do so by your company
The clamping set may only be used in accordance with the technical data (see table 1 and 2).
Unauthorized modifications on the clamping set are not admissible. We do not take any warranty for
resulting damages. To further develop the product we reserve the right for technical modifications.
®
The CLAMPEX
clamping set described in here corresponds to the technical status at the time of
printing of these mounting instructions.
Schutzvermerk
Gezeichnet:
ISO 16016 beachten.
Geprüft:
CLAMPEX
KTR 200 / KTR 201
mounting instructions
Danger of injury to persons.
Damages on the machine possible.
Pointing to important items.
Hints concerning explosion protection.
23.01.09 Pz/Hg
23.01.09 Pz
®
KTR-N
sheet:
edition:
Ersatz für:
KTR-N vom 14.02.08
Ersetzt durch:
40813 EN
1
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLAMPEX KTR 200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KTR CLAMPEX KTR 200

  • Page 1 Please pay special attention to the safety instructions! The mounting instructions are part of your product. Please keep them carefully and close to the clamping set. The copyright for these mounting instructions remains with KTR Kupplungstechnik GmbH. Safety and Advice Hints STOP D A N G E R ! Danger of injury to persons.
  • Page 2 ® CLAMPEX KTR-N 40813 EN KTR Kupplungstechnik sheet: KTR 200 / KTR 201 GmbH D-48407 Rheine edition: mounting instructions Technical Data – KTR 200 1) These are the maximum screw tightening torques. They can be reduced to max. 40 % of the...
  • Page 3 ® CLAMPEX KTR-N 40813 EN KTR Kupplungstechnik sheet: KTR 200 / KTR 201 GmbH D-48407 Rheine edition: mounting instructions Technical Data – KTR 201 1) These are the maximum screw tightening torques. They can be reduced to max. 40 % of the...
  • Page 4 Do not use oils and greases with molybdenum disulphide or high pressure additions as well as slide grease pastes. • Unscrew the clamping screws slightly and insert the clamping set KTR 200 / KTR 201 between shaft and hub. •...
  • Page 5 Assembly Continuation: • Regarding KTR 201 please make sure that the axial supporting ring (component 3) fits closely and evenly. • Tighten the clamping screws evenly and crosswise. Increase the tightening torque step by step. This procedure must be repeated until the tightening torque indicated in table 3 is reached with all clamping screws.
  • Page 6 ® CLAMPEX KTR-N 40813 EN KTR Kupplungstechnik sheet: KTR 200 / KTR 201 GmbH D-48407 Rheine edition: mounting instructions Remark for the use in explosive applications according to ATEX 95 For the use in explosive applications the type and size of clamping set (applying for category 3 only) has to be selected in a way that starting from the peak torque of the machine including all operating parameters to the rated torque of the clamping set there is a service factor of at least s = 2.

This manual is also suitable for:

Clampex ktr 201

Table of Contents