Weber Platinum 2200 LP Manual page 11

INSTALL WORK SURFACE
AND SIDE BURNER
FOR THE PLATINUM SERIES II 3400
You will need... left work surface, side burner assembly,
four 1/4-20 x 1/2 inch bolts, four nylon washers and a
7/16 inch or adjustable wrench.
Insert the left work surface tabs in the slots to the left of
the cooking box. Figure 17 (a). Slip washers on the bolts
and insert the bolts as shown. Tighten. Figure 17 (b).
To install side burner
Note: Remove protective covers from tabs of
side burners.
Insert the side burner assembly tabs in the slots to the right
of the cooking box. Figure 17 (c). Slip washers on the bolts
and insert the bolts as shown. Tighten. Figure 17 (d).
Side burner can only be installed on right side
of barbecue.
Tabs
View from
left side
(b)
Left panel
View from left side
Platinum Series II 3400
11
(a)
Tabs
Figure 17
(c)
Tabs
View from
right side
(d)
View from right
underside