Weber Platinum 2200 LP Manual page 10

INSTALL WORK SURFACE
AND SIDE BURNER
FOR THE PLATINUM SERIES II 3200
(CONTINUED)
Check that the side burner is properly assembled.
(c)
Windshield
Burner cap
Burner ring
(b)
Grate
Lugs
Slots
Igniter
(a)
electrode
Figure 16
Burner head
Burner base
Burner orifice
WARNING: Set the burner ring onto the burner head.
Rotate the burner ring until the four lugs on the
burner ring are seated in the four slots on the burner
head. Figure 16 (b).
Note: The burner head has a hole in it that fits over the
igniter electrode.
After this assembly, proceed to step "Install Bottom
Rack" on page 13.
10