Notes On Safety; Symbols; General Safety Instructions For Power Tools - Parkside PHS 160 E5 Translation Of The Original Instructions

Notes on Safety

This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols on the Equipment
Warning!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Read through the instruction manual
carefully.
Wear ear and eye protection
Wear breathing protection
Wear safety gloves
Protection class II
(Double insulation)
Electrical appliances must not be
disposed of with the domestic waste.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with information
on preventing damage.
Connect the machine to the power
supply.
Pull the mains plug.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, ire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
• Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of lammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
• Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
GB IE
21