Table of Contents
Advertisement
P6EX-A+ User's Manual
4: Reference Information – 4.36
UART Mode Select
Sets mode for the second serial port UART. If you select an IR
module type, the second serial port will not be available. The
setting options are:
Standard (default) – (used by COM2 serial port)
ASKIR
IrDA
The infrared mode you select here should be the same as the
infrared module you have connected to the mainboard. You can
also manually configure the RxD and TxD settings if the defaults
are not correct for the installed module. See the screen illustra-
tion above.
Advertisement
Table of Contents
Need help?
Do you have a question about the P6EX-A+ and is the answer not in the manual?
Questions and answers