Elitegroup Computer Systems P6EX-A+ User Manual page 73

P6EX-A+ User's Manual
4: Reference Information – 4.35
Init Display First
This line sets where the system initially looks for a display
card. The default setting is PCI Slot. If your system has an AGP
display card set this to AGP.
POWER ON Function
This section has two lines, KB Power ON Password and Hot
Key Power ON. This mainboard supports turning on the system
using a keyboard command.
KB Power ON Password sets an access password for the hot
key power on feature. Highlight the option field entry Enter and
press the Enter key to set the password.
Hot Key Power ON sets the hot key command key combina-
tion that turns on the system. The default combination is Ctrl-
F12 which means to press the Control (Ctrl) key and the F12 key
together.
Onboard FDD Controller
Enables or Disables the onboard Floppy Drive controller.
Onboard Serial Port 1/2
Sets the I/O address for serial ports 1 & 2.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard serial port COM1 default
Onboard serial port COM2 default