Elitegroup Computer Systems P6EX-A+ User Manual page 50

P6EX-A+ User's Manual
4: Reference Information – 4.12
Standard CMOS Setup
To enter this section, highlight this menu item in the main
menu and press the Enter key. The screen above will appear. This
sample screen shows a common setup. For technical reasons the
memory figures are not what you will normally see. The system's
installed memory is normally detected and displayed.
Menu Commands
If you look at the lower portion of the screen illustration you'll
see a section that lists the control commands for this level of the
program. You execute a command by pressing the key for that
command. The program commands are :
Quit
This command will close the Setup program when you press
the ESC key.
Help
This displays information about the highlighted item when
you press the F1 key.