Gree GWH18QD-K6DNA1C Series Service Manual page 38

Service Manual
TEMP button
7.
Press this button, you can see indoor set temperature, indoor ambient temperature on indoor unit's display. The setting
on remote controller is selected circularly as below:
8. TURBO button
Press this button to activate / deactivate the Turbo function.
9. I FEEL button
Press this button to turn on I FEEL function.
10. Timer button
Under ON status, press this button to set timer OFF; Under OFF status, press this button to set timer ON.
11. X-FAN button (NOTE:X-FAN is the alternative expression of BLOW for the purpose of understanding.)
12. LIGHT button
Turn on the display's light and press this button again to turn off the display's
NOTICE:
As for the detailed content of remote controller, please refer to QR code on the cover.
Function introduction for combination buttons
Combination of " " and " " buttons: About lock
▲
Press " " and " ▲ " buttons simultaneously 3s to lock or unlock the keypad. If the remote
pressing any button,
Combination of "MODE" and " " buttons:
At unit OFF, press "MODE" and "
Combination of "TEMP" and "TIMER" buttons: About Energy-saving Function
Press "TEMP" and "TIMER" simultaneously in COOL mode to start e nergy-saving function.
" SE " . Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons: About 8
Press "TEMP" and "TIMER" simultaneously in HEAT mode to start 8
and a selected temperature of "8 ".
Technical Information
no display
blinks three times.
About switch between Fahrenheit and centigrade
" buttons simultaneously to switch between
(46 if Fahrenheit is adopted). Repeat the operation to quit the function.
light.
controller is locked,
and .
Nixie tube on the remote controller displays
Heating Function
Heating Function Nixie tube on the remote controller displays "
is displayed. In this case,
"
35