Gree GWH18QD-K6DNA1C Series Service Manual page 124

Service Manual
Steps
6. Remove the soundproof sponge
Tear off the sticking stripe and then remove the
soundproof sponge.
7. Remove isolation plate
Remove the 2 screws connecting the isolation plate
and condenser side plate; remove the 3 screws
connecting the isolation plate and chassis, and then
remove the isolation plate.
8. Remove 4-way valve assy and
valve assy
Unsolder the welding joints connecting
expansion valve assy
capillary sub-assy, compressor and condenser;
remove the
4-way valve.
Note:
Before unsoldering the welding joint, wrap the 4-way
valve with a wet cloth completely to avoid damage to
the valve caused by high temperature.
Installation and Maintenance
electronic expansion
electronic
the 4-way valve assy with
electronic expansion valve assy
Procedure
isolation plate
and
soundproof sponge
4-way valve assy
electronic expansion
valve assy
121