Power Specifications; Power Requirements For Switch Modules; Maximum Power Available To The Switch - Cisco Nexus 9516 Hardware Installation Manual

Aci-mode switch
Hide thumbs Also See for Nexus 9516:
Table of Contents

Advertisement

System Specifications
Component
Line cards that the N9K-C9516-FM-E2 fabric modules support
Fabric Modules
Fan Trays (N9K-C9516-FAN)
Power Supplies

Power Specifications

Power specifications include the specifications for each type of power supply module.

Power Requirements for Switch Modules

Determine the number of power supplies required to operate all the modules in a switch by adding the maximum
power amounts for each module in the switch. Then divide the sum by 3000 W. If there is a fractional amount
in the result, add 1 to the result. For n+1 redundancy, add one more power supply. For n+n redundancy, double
the number of power supplies and provision for a second power source.
To determine the typical consumption, add the typical power amounts for each module in the switch.
Make sure that any new power supplies use the same type of power (AC or DC) as the rest of the power
supplies in the switch. Do not use a mix of AC and DC power sources for a switch.

Maximum Power Available to the Switch

The maximum power available for operations depends on the input power from your power source. Also, the
number and output capabilities of your power supplies, and the power redundancy mode that you use. The
following table lists the amount of power available for 3-kW power supplies depending on power inputs,
numbers of power supplies, and the mode used.
36-port 40-Gigabit Ethernet QSFP+ ACI Spine line card (N9K-X9736PQ)
32-port 100-Gigabit Ethernet QSFP+ ACI Spine line card (N9K-X9732C-EX)
36-port 100-Gigabit Ethernet QSFP28 ACI Spine line card (N9K-X9736C-FX)
36-port 40-Gigabit Ethernet QSFP+ ACI Spine line card (N9K-X9736Q-FX)
40-Gigabit N9K-C9516-FM fabric module
100-Gigabit N9K-C9516-FM-E2 fabric module
3-kW AC Power Supply (N9K-PAC-3000W-B)
3-kW Universal AC/DC Power Supply (N9K-PUV-3000W-B)
3.15-kW Dual Input Universal AC/DC Power Supply (N9K-PUV2-3000W-B)
3-kW DC Power Supply (N9K-PDC-3000W-B)
Cisco Nexus 9516 ACI-Mode Switch Hardware Installation Guide
Power Specifications
Weight per Unit
11.2 lb (5.08 kg)
12.13 lb (5.5 kg)
14.6 lb (6.2 kg)
14.6 lb (6.2 kg)
11.5 lb (5.2 kg)
20.3 lb (9.2 kg)
15.08 lb (6.84 kg)
6.2 lb (2.8 kg)
5.9 lb (2.67 kg)
5.9 lb (2.67 kg)
6.4 lb (2.9 kg)
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 9000 seriesC9516-fm-e-e2

Table of Contents