Table of Contents
Advertisement
Replacing or Installing Modules, Fan Trays, and Power Supplies
1
Unscrew 2 captive screws (1 on each ejector handle).
2
Rotate both ejector handles away from the front of
the module.
3
Be sure that the locking posts fully rotate down into
the module.
Step 3
Fit the guide rails on the top of the module into the track on the top of the slot. Make sure that the guide bar on the bottom
of the module goes into the module guide at the bottom of the slot.
4
Align the rails on the top of the module to the track on
the top of the open slot.
5
Align the bottom of the module so that it slides into the
tracks on the bottom of the open slot.
6
Slide the module all the way into the slot.
Cisco Nexus 9516 ACI-Mode Switch Hardware Installation Guide
Installing a Fabric Module
63
Advertisement
Table of Contents
