Table of Contents
Advertisement
Chapter 7: Configure Logging
The WatchGuard Security Event Processor page appears.
3
Select Enable WatchGuard Security Event Processor Logging.
4
Enter the IP address of the WSEP server that is your log host in
the appropriate field.
In our example, 192.168.111.5.
5
In the Log Encryption Key field, enter a passphrase and
confirm it.
6
Click Submit.
This encryption key must be identical to the one used in the WSEP .
78
N
OTE
WatchGuard Firebox SOHO 6.1
Advertisement
Table of Contents
