Watchguard Firebox SOHO 6.1 User Manual page 47

the default IP address, go to: http://192.168.111.1. Click
Reboot.
• Unplug the SOHO 6 and reconnect it to a power source.
To reboot a SOHO 6 located on a remote system, you must set the
SOHO 6 to allow either incoming HTTP (Web) or FTP traffic to the
trusted address of the SOHO 6. For information on configuring a
SOHO 6 to allow incoming traffic, see "Configure Incoming and
Outgoing Services" on page 62.
You then use one of these methods:
• With your Web browser, go to the System Status page using
the external IP address of the SOHO 6. Click Reboot.
• Send an FTP command to the remote SOHO 6. Use an FTP
application to connect to the SOHO 6, then enter the
command:
User Guide
quote rebt
Reboot the SOHO 6
29