Watchguard Firebox SOHO 6.1 User Manual page 117

3 Select Enable WebBlocking.
4 Enter the full access password.
The full access password allows a user a to bypasses otherwise blocked
sites.
5 Enter the inactivity timeout in minutes.
For example, setting the inactivity timeout at 15 minutes ensures that
unattended Web browsers are disconnected after sitting idle for 15
minutes.
6 If you intend to use WebBlocker groups and users, select
Require Web users to authenticate.
7 Click Submit to register your changes.
Create WebBlocker Groups and Users
Follow these instructions to create WebBlocker Groups.
1 With your Web browser, go to the SOHO 6 Configuration
Settings page using the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2 From the navigation bar on the left side, select
WebBlocker = > Groups.
User Guide
Configure the SOHO 6 WebBlocker
99