Create A Custom Service - Watchguard Firebox SOHO 6.1 User Manual

2 Locate a pre-configured service, such as FTP, Web, or Telnet,
then select either Allow or Deny from the drop list.
In our example, the HTTP service is set to Allow enabling Web traffic
incoming.
3 Enter the trusted network IP address of the computer to which
this rule applies.
In our example, 192.168.111.2.
4 Click Submit.

Create a Custom Service

In addition to the pre-configured services provided by the SOHO 6
configuration page, you can create custom services using either a
TCP port, UDP port or specifying an IP protocol.
Follow these steps to create a custom service:
1 With your Web browser, go to the System Status page using
the Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
User Guide
Configure Incoming and Outgoing Services
63