2
At the default prompt, type
3
Enter the TCP/IP settings in the chart provided below.
4
Click Cancel.
Microsoft Windows NT
1
Click Start = > Programs = > Command Prompt.
2
At the default prompt, type
3
Enter the TCP/IP settings in the chart provided below.
4
Click Cancel.
Microsoft Windows 95 or 98 or ME
Click Start = > Run.
1
winipcfg
2
Type:
3
Select the "Ethernet Adapter."
4
Enter the TCP/IP settings in the chart provided below.
5
Click Cancel.
Macintosh
1
Click the Apple menu = > Control Panels = > TCP/IP.
2
Enter the TCP/IP settings in the chart provided below.
3
Close the window.
Other operating systems (Unix, Linux)
1
Consult your operating system guide to locate the TCP/IP
screen.
2
Enter the settings in the chart provided below.
User Guide
ipconfig/all
ipconfig/all
. Click OK.
Before You Begin
, then press Enter.
, then press Enter.
13