Enable Your Computer For Dhcp - Watchguard Firebox SOHO 6.1 User Manual

Chapter 2: Installation
Internet Explorer 5.0, 5.5, and 6.0
1 Open Internet Explorer.
2 Click Tools => Internet Options.
The Internet Options window appears.
Click the Advanced tab.
3
4 Scroll down the page to HTTP 1.1 Settings.
5 Disable all checkboxes.
6 Click OK to save the settings.

Enable your computer for DHCP

In order to access the special configuration pages on the SOHO 6
after you have physically connected it, your computer must be
configured to receive it's network IP address by DHCP. For more
information regarding network addressing as well as DHCP, see
"Network addressing" on page 31.
The configuration instructions in this section are for the Windows 2000
operating system.
1 Click Start = > Settings = > Control Panel.
The Control Panel window appears.
2 Double-click the Network & Dial-up Connections icon.
3 Double-click on the connection you use to access the Internet.
The network connection dialog box appears.
16
N
OTE
WatchGuard Firebox SOHO 6.1
®