Table of Contents
Advertisement
Chapter 5: Administrative Options
Update Your Firmware
As new firmware is released, you should update the version
running on your SOHO 6. New updates are located on the
WatchGuard Web site at:
http://support.watchguard.com/sohoresources/
Download the new firmware file from the Web site and save it to a
known location on your management station.
Once you have downloaded the firmware, follow these steps to
update the version running on your SOH O 6:
1
With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select
Administration = > Update.
The Update page appears.
If you are managing your SOHO 6 from a computer running an operating
system other than Windows (such as a Macintosh or Linux OS), you
update your firmware from this configuration page as firmware versions
are released. This is because WatchGuard installation applications are
only built for Windows platforms.
3
Read through the End-User License Agreement, then select the
I accept the above license agreement checkbox at the bottom
of the page.
56
N
OTE
WatchGuard Firebox SOHO 6.1
must
Advertisement
Table of Contents
