Advertisement
7. USING METHOD
AUTOMATIC OPERATION
Connect to power,indoor operation lamp flash.
1. Press "MODE" button, select " AUTO "
2. Press the button "▲" and "▼", set temperature you want, generally it is among 17°C(62°F)~30°C(88°F);
3. Press " ON/OFF" button, operation lamp is on, the air-conditioner work in auto mode, indoor fan is auto, and
can not be changed. Auto is displayed on LCD. Press ON/OFF button again to stop.
4. Economy operation is valid in auto mode.
5. In event of power interruption such as a blackout, the air conditioner stops once. But it restarts automatically
and performs previous operation when the power supply is resumed.
COOL/HEAT/FAN MODE OPERA-TION
1. Press "MODE" button, select "COOL", "HEAT" or "FAN ONLY" mode.
2. Press temperature adjust button to select setting temp.
3. Press "FAN SPEED" button to select high/mid/low/auto.
4. Press "ON/OFF" button, indoor unit operation lamp on, it works in selected mode. Press "ON/OFF" button
again, it stops to work.
Remark: When in fan mode, no tempera-ture can be set.
DRY OPERATION
1. Press " MODE " button, select " DRY " mode.
2. Press temperature adjust button to select setting temp.
3. Press " ON/OFF " button, indoor unit operation lamp on, it works in dry mode. Press ON/OFF button again, it
stops to work.
4. In dry mode, economy operation and fan speed are ineffective.
TIMER SETTING
Timer on only:
1. Press " TIME ON " button, it display "SET" on LCD, and display " H " and "ON" , it is waiting for timer on
setting.
2. Press " timer " on button repeatedly to adjust time setting.
3. If press this button and hold on, the time will increase at 0.5h, after 10h, it increase at 1h.
4. After setting 0.5 second, the wire controller send timer on information, it is finished.
Timer off only:
1. Press "TIME OFF " button, it display "SET" on LCD, and display " H " and ON, it is waiting for timer on setting.
2. Press "TIME OFF" button repeatedly to adjust time setting.
3. If press this button and hold on , the time will increase at 0.5h, after 10h, it increase at 1h.
4. After setting 0.5 second, the wire controller send timer off information, it is finished.
TIMER ON AND TIMER OFF BOTH
1. Set timer on time as the correspond-ing step1 and 2.
2. Set timer off time as the correspond-ing step1 and 2.
3. Timer off time must be longer than timer on time.
4. 0.5 second after setting, the wire controller send information.the setting is finished.
CHANGE TIMER
If there is a need of changing timer time, press corresponding button to revise it. If concel timer, change timer
time to 0.0.
NOTE
The timer time is relative time,that is delay after setting time( i, e: setting time is 8:05 A,M). So when imer is set,
the standard time can not be adjusted.
6
Advertisement
Chapters
